Hyde Tools 62480 Mill Blade (2607) Flat Grind | the Hyde Store
Industrial Mill Blades — Consumable Or Replacement Component
№62480

Hyde Tools 62480 Flat Grind Mill Blade 2607

MODEL 62480 · SKU H-62480 · UPC 079423624803
CHECK THIS AGAINST MY JOB
$19.01 PER UNIT · SINGLE UNIT UNIT PRICE

IN STOCK
✓ SAME-DAY DISPATCH — ELIGIBLE IN-STOCK ORDERS BY 2 PM ET
✓ FREE SHIPPING — ORDERS OVER $30
✓ LOCAL PICKUP — FALL RIVER
✓ NET-30 & PO — APPROVED ACCOUNTS
Flat Grind Mill Blade 2607

Official Hyde specifications

Dimensions
6" x 3/4" x .072"
PRODUCT FIT · IS THIS THE RIGHT TOOL? Straight answers. If it's the wrong tool for your job, we'll say so.

The guidance below describes applications and limitations. For a match to your particular job or an existing tool, ask us to confirm fit.

CHECK THIS AGAINST MY JOB →

Is this the right tool for your job?

✕CHOOSE A DIFFERENT TOOL WHEN
  • Not the reaching blade — into a machine frame or across a wide lap, the 9" 086 (62180) exists precisely because a 6" blade cannot get there.
  • Not the abrasive-synthetics blade: cutting filled fiber, polyester cord, or rubberized stock all shift eats a carbon edge by heat and abrasion, and that is the HSS patterns' job (the flat HSS blades, and the bevel HSS blades where edge backing is needed).
  • Not a bevel blade — dense, grabby stock and glancing loads that would roll a thin flat edge want the bevel grind (62600/62750 class), not this flat one.
  • And not a finished knife: this is a station consumable clamped in a handle, not a one-owner riveted tool.

Jobs this tool does

EXACT JOB METHODS FOR HYDE №62480
Job guide How to Control Between-Change Service for a Standard Mill BladeOPEN JOB GUIDE Job guide How to Trim Selvage and Roll-Goods Edges by HandOPEN JOB GUIDE

For these jobs—use this instead

THE JOB, THE REASON, AND THE BETTER TOOL
Reaching cuts inside machine frames Into a machine frame or across a wide lap, the 9" 086 (62180) exists precisely because a 6" blade cannot get there. BETTER TOOL Mill Blade (086) Flat Grind 62180 Dense, grabby stock Dense, grabby stock and glancing loads that would roll a thin flat edge want the bevel grind (62600/62750 class), not this flat one. BETTER TOOL Mill Blade (BG182M) Bevel Grind High 62600

How the pros run it

01

Set exposure to the cut

Short exposure for stiff, controlled parting; longer only when reach demands it. A 6" blade has little length to give away, which is the point — it is a close-quarters, high-control blade, not a reaching one. Hone the flat flat. The grind is single-plane, so a flat bench stone maintains it correctly; keep the edge square and keen, strop off the wire edge, and the blade comes back to full sharpness many times before it is spent. Keep it dry. High-carbon steel blooms rust where stainless would shrug — wipe it down after any wet or oily work. Check the clamp. A mill blade is only as safe as its set screw: screws tight, exposure no longer than the cut needs, and never a blade run so far out that it flexes and grabs.

Asked before buying

BUYER QUESTIONS, ANSWERED BEFORE YOU ORDER
Why is this blade 6" when the other 3/4" blades are 6-1/2"?
That half-inch is the point. A shorter blade at the same width is stiffer under the same hand force and fits tighter working room. If you need reach or stroke, the 6-1/2" 3/4" patterns (or the 9" 086) are the honest choice.
Is it interchangeable with the 6-1/2" 3/4" flats?
Functionally close — same width, thickness, flat grind, and Standard steel — but the length differs, and a plant standardized on one pattern should reorder that exact pattern. Match 2607 to 2607.
Will it cut abrasive synthetic cord all day?
It will cut it, but carbon steel dulls fast on abrasive stock. If edges are coming back worn quickly, that is the argument for a high-speed-steel pattern, not this one.
Does it need a handle?
Yes — it is a bare consumable blade. It clamps in a 3/4"-capable handle (63085 or 63080) by the slotted set screw.
How do I keep it sharp?
Hone the flat on a bench stone, strop the burr, and re-extend it in the handle as honing shortens it. Keep it dry against rust. Retire it only when width or temper is gone.

Compare Hyde models

Crew & facility ordering

Model & SKUModel 62480 · SKU H-62480 · UPC 079423624803
Product-specific quantity pricingSee this product’s published tiers above. Eligible discounts apply automatically at checkout.
PO & NET-30Approved contractors, facilities, schools and government buyers can route through Hyde Pro.
BUY FOR A CREW OR FACILITY →

Reviews

Specs & documentation

Full specification details
catalog product name
Flat Grind Mill Blade 2607
specifications
dimensions: 6" x 3/4" x .072"
official product name
Mill Blades - Flat Grind Mill Blades
official variant identity
62480 — Standard / 2607
Hyde official catalog evidence ↗Hyde Tools manufacturer source ↗
$19.01PER UNIT · H-62480