Hyde Tools 62810 Mill Blade (5532M) Flat Grind High Speed | the Hyde Store
Industrial Mill Blades — Consumable Or Replacement Component
№62810

Hyde Tools 62810 Flat Grind HSS Mill Blade 5532M

MODEL 62810 · SKU H-62810 · UPC 079423628108
CHECK THIS AGAINST MY JOB
$20.56 PER UNIT · SINGLE UNIT UNIT PRICE

Selected subtotal: $20.56. Standard US shipping is $9.99 below $15, $7.99 from $15 to below $49, and free at $49 after discounts. Freight items excluded; other rates are shown at checkout.

IN STOCK
✓ SAME-DAY DISPATCH — ELIGIBLE IN-STOCK ORDERS BY 2 PM ET
✓ STANDARD US SHIPPING — $9.99 BELOW $15 · $7.99 FROM $15 · FREE AT $49 AFTER DISCOUNTS
✓ LOCAL PICKUP — FALL RIVER
✓ NET-30 & PO — APPROVED ACCOUNTS
Flat Grind HSS Mill Blade 5532M

Official Hyde specifications

Dimensions
6-3/8" x 3/4" x .072"
PRODUCT FIT · IS THIS THE RIGHT TOOL? Straight answers. If it's the wrong tool for your job, we'll say so.

The guidance below describes applications and limitations. For a match to your particular job or an existing tool, ask us to confirm fit.

CHECK THIS AGAINST MY JOB →

Is this the right tool for your job?

✕CHOOSE A DIFFERENT TOOL WHEN
  • Not the default blade — for ordinary, non-abrasive mill cutting the Standard carbon flats (2607, BG20, BG71A, 088) are the right, cheaper, easier-to-hone choice; HSS is the abrasion upgrade, not a general "better." Not the dense-grabby blade: material that rolls a thin flat edge, or glancing cuts, want a bevel grind — and the line offers HSS in bevel form (62600/62630) for exactly that.
  • Not the short-stroke heavy blade: high-force chopping into thick dense stock is the .109" stub blades' brief.
  • Not a corrosion solution — HSS resists heat and wear, not rust.
  • And not a finished knife.

For these jobs—use this instead

THE JOB, THE REASON, AND THE BETTER TOOL
Ordinary non-abrasive mill cutting For ordinary, non-abrasive mill cutting the Standard carbon flats (2607, BG20, BG71A, 088) are the right, cheaper, easier-to-hone choice; HSS is the abrasion upgrade, not a general "better." Not the… BETTER TOOL Mill Blade (BG182M) Bevel Grind High 62600

How the pros run it

01

Buy it for abrasion, not by default

HSS earns its price only where abrasive or filled stock is the edge-killer; for ordinary soft-fiber cutting the Standard carbon flats are cheaper and easier to bring back, and fitting HSS to solve what is really a dull edge or the wrong grind wastes money. Honing is harder — and that is the point. High-speed steel resists wear, so it also resists the stone; it takes more work and rewards a proper abrasive, but hone the flat square, strop the burr, and re-extend the blade as it wears. Heat-resistant is not rust-resistant. HSS is a tool steel, not stainless — keep the blade dry after wet or oily work. Exposure and clamp as with any mounted blade: no longer than the cut needs, set screws tight.

Asked before buying

BUYER QUESTIONS, ANSWERED BEFORE YOU ORDER
What does HSS give me over a carbon flat blade?
Wear life against abrasive stock. High-speed steel holds its edge far longer on filled fiber, cord, and rubberized material, so an abrasive station changes blades much less often. On ordinary soft fiber, a carbon blade is cheaper and easier to hone.
Why is it 6-3/8" and the 088 HSS is 6-1/2"?
An eighth of an inch, and that is the only listed difference between them — the choice is really which pattern your plant already stocks.
The variant tag says "Standard" — is it carbon or HSS?
The catalog product name says HSS ("Flat Grind HSS Mill Blade 5532M"), and this guide treats it as high-speed steel; a hydetools variant tag reading "Standard" conflicts and is flagged for Hyde to resolve .
Is it stainless?
No — HSS is a tool steel that resists heat and wear, not corrosion. Keep it dry.
Does it need a handle, and which one?
Yes — it is a bare blade. The 3/4" width takes the 63085 or 63080 handle.

Compare Hyde models

Crew & facility ordering

Model & SKUModel 62810 · SKU H-62810 · UPC 079423628108
Product-specific quantity pricingSee this product’s published tiers above. Eligible discounts apply automatically at checkout.
PO & NET-30Approved contractors, facilities, schools and government buyers can route through Hyde Pro.
BUY FOR A CREW OR FACILITY →

Reviews

Specs & documentation

Full specification details
catalog product name
Flat Grind HSS Mill Blade 5532M
specifications
dimensions: 6-3/8" x 3/4" x .072"
official product name
Mill Blades - Flat Grind Mill Blades
official variant identity
62810 — Standard / 5532M
Hyde official catalog evidence ↗Hyde Tools manufacturer source ↗
$20.56PER UNIT · H-62810