Hyde Tools 05532 Plastic V - Notch Adhesive Spreader, 3” | the Hyde Store
Adhesive Spreaders And Notched Tools — Primary Tool
№05532

Hyde Tools 05532 3" Plastic Adhesive Spreader 3/16" x 5/32" V-notch

MODEL 05532 · SKU H-05532 · UPC 079423055324
CHECK THIS AGAINST MY JOB
$3.25 PER UNIT · SINGLE UNIT UNIT PRICE

IN STOCK
✓ SAME-DAY DISPATCH — ELIGIBLE IN-STOCK ORDERS BY 2 PM ET
✓ FREE SHIPPING — ORDERS OVER $30
✓ LOCAL PICKUP — FALL RIVER
✓ NET-30 & PO — APPROVED ACCOUNTS
3" Plastic Adhesive Spreader 3/16" x 5/32" V-notch
Official feature
For wallboard, metal and ceramic tile
Hyde specifies
THE COUNTER · PRODUCT FIT Straight answers. If it's the wrong tool for your job, we'll say so.

Exact job fit is not yet established for this product.

CHECK THIS AGAINST MY JOB →

Is this the right tool for your job?

✕DO NOT FORCE THE FIT
  • A tool you want to keep. If you'll do this V-notch work more than once and want a spreader that cleans up and lasts, buy the steel — the handled Value Series 04124 or the bare-plate 19110 — not this.
  • Floor and wet-area tile. Cementitious thinset on a floor or in a shower wants a square notch (19050/19070); a V spreader of any material is the wrong bed for it.
  • Resilient sheet goods. Sheet vinyl and VCT want fine U/square vinyl meters laid paint-thin; a 3/16" V is the wrong profile and too open, and would telegraph through the finished floor.
  • The square-notch jobs. Rubber and plastic sheet, or fine even tile beds, are a square-notch job — its plastic sibling 05534, or the steel fine squares — not this V.
  • Heavy bodied adhesive that wants a full bead. The wider 1/4" V (04124 in steel) carries more film; a 3/16" V runs leaner.

Jobs this tool does

EXACT JOB METHODS FOR HYDE №05532
Counter-checked How to Match the Notch to the Covering and Adhesive — Let the Exact System Documents Choose the MeterOPEN JOB GUIDE Counter-checked One-Job DIY Adhesive Spreading Without Guessing the MeterOPEN JOB GUIDE Counter-checked How to Repair Small Areas of Flooring and TileOPEN JOB GUIDE Counter-checked How to Set Ceramic Wall Tile in MasticOPEN JOB GUIDE
VIEW 1 MORE DOCUMENTED JOB
Counter-checked Wallboard and Panel Adhesive WorkOPEN JOB GUIDE

How the pros run it

01

Spread at a consistent ~45°; flatter starves the bond, steeper over-delivers. One direction, straight ridges

swirls trap air. Use a fresh spreader for each pour of a job long enough to soften the edge; the whole point is that a spare costs less than a bad bed. And because the disposable spreader is the natural tool for solvent-based adhesives, this is the page that has to say it: work those with real ventilation and no ignition sources — solvent contact and construction adhesives give off flammable vapor while they flash, and the disposable-blade convenience does nothing to change the room's air. Read and follow the adhesive label's fire and vapor warnings; they outrank this page.

Asked at the counter

BUYER QUESTIONS ANSWERED BEFORE THE CART, NOT AFTER THE RETURN
Is the plastic one as accurate as the steel?
On the first pass, yes — the molded V meters the same bead as the steel 19110. The difference is longevity: the plastic edge softens with use and is a one-job meter, not a lifetime one.
Why would I buy plastic instead of steel?
Because solvent and construction adhesives are miserable to clean off a blade, and this costs less than the labor and solvent to salvage a steel spreader. Spread, let it skin, throw it out.
What does 3/16" × 5/32" mean?
The first figure, 3/16", is the notch width; the second is the catalog's remaining dimension, quoted without interpreting it as depth or spacing .
Can I set a shower or floor with it?
No — that is thinset-and-square-notch work (19050/19070). This V is for dry-wall mastic tile, wallboard, and metal.
Any safety note?
Yes: it is the natural tool for solvent-based adhesives, so ventilate and keep ignition sources away, per the adhesive label.

Compare Hyde models

Crew & facility ordering

Model & SKUModel 05532 · SKU H-05532 · UPC 079423055324
Quantity pricingPublished tiers apply automatically at checkout. Private account prices are never invented.
PO & NET-30Approved contractors, facilities, schools and government buyers can route through Hyde Pro.
BUY FOR A CREW OR FACILITY →

Reviews

Customer Reviews

Based on 1 review
100%
(1)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
s
shawn conlon (Trenton, US)

Hyde Tools 05532 Plastic V-Notch Adhesive Spreader, 3”

Specs & documentation

Full spec sheet
catalog product name
3" Plastic Adhesive Spreader 3/16" x 5/32" V-notch — OFFICIAL EXACT MODEL
official family claim
For wallboard, metal and ceramic tile. — OFFICIAL FAMILY CLAIM APPLICABLE TO EXACT LISTED MODEL
official product name
Adhesive Spreaders — OFFICIAL EXACT VARIANT
official variant identity
05532 — Economy / Plastic / 3/16" x 5/32" V-notch — OFFICIAL EXACT VARIANT
Hyde official catalog evidence ↗Hyde Tools manufacturer source ↗
$3.25SKU H-05532