Hyde Tools 53300 McKay Stitcher Knife (B), 2 - 1/8” x 5/8” | the Hyde Store
Footwear And Leather Knives — Primary Tool
№53300

Hyde Tools 53300 McKay Stitcher Knife (B)

MODEL 53300 · SKU H-53300 · UPC 079423533006
CHECK THIS AGAINST MY JOB
$14.42 PER UNIT · SINGLE UNIT UNIT PRICE

Selected subtotal: $14.42. Standard US shipping is $9.99 below $15, $7.99 from $15 to below $49, and free at $49 after discounts. Freight items excluded; other rates are shown at checkout.

AVAILABLE TO ORDER · CONFIRM LEAD TIME
✓ SAME-DAY DISPATCH — ELIGIBLE IN-STOCK ORDERS BY 2 PM ET
✓ STANDARD US SHIPPING — $9.99 BELOW $15 · $7.99 FROM $15 · FREE AT $49 AFTER DISCOUNTS
✓ LOCAL PICKUP — FALL RIVER
✓ NET-30 & PO — APPROVED ACCOUNTS
McKay Stitcher Knife (B)

Official Hyde specifications

Blade dimensions
2-1/8" x 5/8" x .058"
PRODUCT FIT · IS THIS THE RIGHT TOOL? Straight answers. If it's the wrong tool for your job, we'll say so.

The guidance below describes applications and limitations. For a match to your particular job or an existing tool, ask us to confirm fit.

CHECK THIS AGAINST MY JOB →

Is this the right tool for your job?

✕CHOOSE A DIFFERENT TOOL WHEN
  • Not a station blade — it is a whole riveted knife for one hand, not a consumable that mounts in a handle at a cutting floor (that is the extension-blade half of this line, 57xxx).
  • Not a heavy-force tool — the light 17-gauge blade is for control, not for the prying and gouging the stub-bladed 61080 is built to survive.
  • Not the clipped-point knife — that geometry and Hyde's "Clipped Point" name belong to the (A/53360), and this guide doesn't borrow either.
  • Not an inside-panel starter for large sheet work — piercing the middle of a hide and drawing a long cut is the sharp-point knives' job (55000/55050), which carry longer blades made for the stroke.
  • And not a square-end tool: this is a pointed knife, so it will puncture whatever lies under the work — if protecting the layer beneath is the goal, that is the square-point line's guarantee, one bench over.

Jobs this tool does

EXACT JOB METHODS FOR HYDE №53300
Job guide How to Open a Stitched Seam Without Cutting the Joined ComponentsOPEN JOB GUIDE Job guide How to Sharpen and Maintain a Pattern Knife Without Changing Its GeometryOPEN JOB GUIDE Job guide How to Use the McKay Stitching Bench for Knife WorkOPEN JOB GUIDE

For these jobs—use this instead

THE JOB, THE REASON, AND THE BETTER TOOL
Prying and gouging The light 17-gauge blade is for control, not for the prying and gouging the stub-bladed 61080 is built to survive. BETTER TOOL Heavy Duty Bevel Point BG268, 2" x 1" 61080 Clipped-point work That geometry and Hyde's "Clipped Point" name belong to the (A/53360), and this guide doesn't borrow either. BETTER TOOL McKay Stitcher Knife A, 2-3/4" x 3/4" 53360 Inside-panel starts on large sheets Piercing the middle of a hide and drawing a long cut is the sharp-point knives' job (55000/55050), which carry longer blades made for the stroke. BETTER TOOL Sharp Point #1, 3/4" x 9/16" 55000

How the pros run it

01

Grip and range

Choke up: this is a fingertip knife, held close, the blade an extension of the index finger. Its whole reason to be short is to work near a machine and near the eye without the tip roaming. Angle. Low and shearing for trimming and channel work; steeper and point-led for picking a seam. The point is the tool. A stitcher knife lives or dies by a keen point — so keep it, and never pry with it. Twisting or levering the fine tip is how these knives die; the (A)'s heavier gauge tolerates more abuse, and this lighter (B) tolerates less. Edge care. High-carbon cutlery steel takes and re-takes a very keen edge on a stone — that is the whole bargain of a riveted personal knife versus a consumable blade. Hone on a fine bench stone, strop the burr off, and keep the point above all. Rust. Carbon steel blooms where stainless would shrug; wipe it dry after cutting anything wet or after a day of hand-oil and leather dust, and it will outlast its owner.

Asked before buying

BUYER QUESTIONS, ANSWERED BEFORE YOU ORDER
Is the (B) the clipped-point stitcher knife?
No — the clipped point is the (A/53360), which is Hyde's own naming. The (B) is the smaller, lighter-gauge pattern of the pair; its point form is not separately specified in the record beyond its being the non-clipped knife .
Why is the blade so short?
Because it works at the stitching machine, in the hand, near the needle — a short, stiff 2-1/8" blade is control at that range, and the shortness is deliberate, not a downgrade.
(B) or (A)?
The (B) for the finer, more delicate hand-cut and closer work; the (A) for the heavier hand, longer reach, and clipped tip. Nothing in the record assigns them to specific bench operations .
Will it rust?
It is high-carbon cutlery steel — wipe it dry after wet or oily work and hone it on a stone; the re-takeable keen edge is exactly what the riveted personal knife buys you over a consumable blade.
Can I use it to start a cut in the middle of a hide?
You can pierce with it, but that stroke belongs to the longer sharp-point knives (55000/55050); the stitcher's short blade is made for close trimming, not long inside-started draws.

Compare Hyde models

Crew & facility ordering

Model & SKUModel 53300 · SKU H-53300 · UPC 079423533006
Product-specific quantity pricingSee this product’s published tiers above. Eligible discounts apply automatically at checkout.
PO & NET-30Approved contractors, facilities, schools and government buyers can route through Hyde Pro.
BUY FOR A CREW OR FACILITY →

Reviews

Specs & documentation

Full specification details
catalog product name
McKay Stitcher Knife (B)
specifications
blade dimensions: 2-1/8" x 5/8" x .058"
official product name
Stitcher Knife
official variant identity
53300
Hyde official catalog evidence ↗Hyde Tools manufacturer source ↗
$14.42PER UNIT · H-53300