✓SAME-DAY DISPATCH — ELIGIBLE IN-STOCK ORDERS BY 2 PM ET
✓FREE SHIPPING — ORDERS OVER $30
✓LOCAL PICKUP — FALL RIVER
✓NET-30 & PO — APPROVED ACCOUNTS
Documented for Shield Trim and Base While Spraying Walls — The Complete Step-by-Step Guide; Spray a Two-Tone Line — The Complete Step-by-Step Guide; Spray Closets, Stairwells, and Tight Spaces — The Complete Step-by-Step Guide; plus 2 more documented jobs.
Official Hyde specifications
18" Acme-threaded hardwood handles
PivotNeck system adjusts to any angle
PRODUCT FIT · IS THIS THE RIGHT TOOL?Straight answers. If it's the wrong tool for your job, we'll say so.
Choose this when: Jobs explicitly linked by authored Hyde application guides.
The documented job is “Shield Trim and Base While Spraying Walls — The Complete Step-by-Step Guide”.
The documented job is “Spray a Two-Tone Line — The Complete Step-by-Step Guide”.
The documented job is “Spray Closets, Stairwells, and Tight Spaces — The Complete Step-by-Step Guide”.
The documented job is “Spray Exterior Trim Against Brick, Stone, and Siding — The Complete Step-by-Step Guide”.
The documented job is “How to Spray Walls to a Crisp Ceiling Line — The Complete Step-by-Step Guide”.
✕CHOOSE A DIFFERENT TOOL WHEN
Not for textured, waved, or aged surfaces: the rigid edge touches high spots and bridges hollows, and every bridged hollow passes fog under a line that looks perfect from three feet away.
Not for carpet: this blade cannot tuck into pile at a tack strip — that is the flexible 24's signature move, and the single clearest way to tell these twins apart.
Not for curved or irregular lines — archways, scribed stone, radius walls go to the 28100 clip with cut cardboard.
Not the stride tool for open rooms or corridors: same fence, longer reach, fewer stops — 28030, then 28040.
And not a masking substitute: the room still gets its drops and film; this blade only guards the line it is currently touching.
pressure with this blade is seat-and-hold, not spring-and-conform; pressing harder does not close a gap over a hollow, it just tires the hand. If daylight shows under the edge, the surface is telling you it wants the 28010. Placement: because the edge is straight by construction, placement accuracy is everything — set the edge on the mark, not near it; the blade will not adapt to a sloppy seat. Angle: face pitched toward the gun at the PivotNeck, set once per line. Gun path: parallel passes only; never rake along the blade toward the tip. Edge care: the working inch is the tool — store it hung or flat, never loose in a bucket of steel.
Asked before buying
BUYER QUESTIONS, ANSWERED BEFORE YOU ORDER
Stiff or flexible at 24 inches?
Ask the surface. Glass, new trim, flat drywall → stiff (this blade). Texture, waves, old sash, carpet → flexible (28010). Each produces the other's failure on the wrong substrate: waver from flex on true lines, fog-under from stiffness on wavy ones.
Can I do windows without tape with this?
Yes — that is its flagship job (2a): edge on the glass at the muntin line, overlap past every intersection, wipe between panes. Straight muntins only; cupped antique beds want the flex twin.
Why is there fog under my perfectly straight line?
The surface isn't as flat as the blade. A rigid edge bridges hollows and each one is a tunnel — move to the 28010 on that wall.
Will lacquer, oil, or thinner hurt it?
No. Aluminum is the solvent-proof branch of the family; the rag that cleans this edge would soften a polystyrene blade.
Is the handle included?
The family claim describes 18" Acme-threaded hardwood handles, and a separate replacement handle SKU exists — box contents are not stated per-SKU; verify before relying on it.
Does it fit an extension pole?
The Acme thread implies it — stated officially only for the 28100; treat pole fitment here as unverified until confirmed.
Can I cut in a two-tone line with it?
Yes, in tight quarters (2b): chalk or laser sets the mark, first color dries fully, wipe at every placement. Long open runs step up to the 28030/28040.
