Not straight rigid cutting — a limber .058" blade wanders where the job wants a stiff line; the .072" bevels (62600/62630/62750) are the straight-trim blades.
Not soft-fiber slicing, which wants a flat grind.
Not general reach or stroke — at 5-1/2" it is the short blade, and the 9" 086 owns reach.
Not a corrosion solution (HSS resists heat and abrasion, not rust), and not a finished knife.
And do not rank it against the 62900 or pair it with a handle on assumption — both are open questions on the record .
The .058" thickness is a feature: guide the limber blade along the contour and let it follow the surface; forcing a limber blade into a straight rigid cut just makes it wander. Hone the facet. Maintain the bevel on its angled facet, strop the burr off the back, and never flatten it on a stone. Expect HSS to resist the stone — the wear resistance you paid for is also honing resistance; use a proper abrasive. Keep it dry — HSS is a tool steel, not stainless. Confirm the handle and clamp — because the handle fit is unverified, check that whatever handle you use clamps the .690" width positively before running it, and keep exposure short on a thin blade so it does not buckle.
Asked before buying
BUYER QUESTIONS, ANSWERED BEFORE YOU ORDER
What is this blade for that the other bevels aren't?
Following contours. At .058" it is the limber bevel — thin enough to flex around a curved or yielding surface — where the .072" bevel blades are stiff straight-trim blades. Use it for contoured deflashing and skiving; use the thicker bevels for rigid straight cuts.
How is it different from the 62900?
Unclear on the record — both list as the 3551M at 5-1/2" × .690" × .058", separated only by an unresolved gauge tag, and the 62900's store title contradicts its official listing. We do not rank them until Hyde resolves it .
Which handle fits it?
Unconfirmed. Its .690" width sits between the 5/8" and 3/4" handle capacities, and no source says which handle takes it — ask Hyde before buying a handle for it .
What does "16 Gauge" mean here?
Unresolved — and this blade proves the tag is not simple thickness: it is tagged 16 Gauge at .058", while the 62630 is tagged 16 Gauge at .072". Treat the tag as a label, not a dimension .
Is it stainless?
No — HSS resists heat and abrasion, not rust. Keep it dry.
