Not a finished knife — it is a bare blade and does nothing without a matching handle.
Not the low-drag slicing blade for soft fiber, yarn, and cloth: that is the flat-grind family (the 62030/62090/62300 class), whose single-plane edge cuts soft stock with less resistance and hones dead-flat.
Not the honable-forever economy blade: that is Standard high-carbon steel; this is the HSS upgrade, bought for wear life, not for edge-taking.
And — until the identity gate clears — not a blade whose exact profile you should represent to a customer.
Selling it as "straight" or as "short curve" before Hyde confirms which ships is exactly the error this guide exists to prevent.
How the pros run it
01
Exposure discipline
In the handle, set the blade out no farther than the cut needs — short exposure for stiff, controlled cuts; longer only for reach. A consumable blade is only as safe as its clamp: screws checked tight, exposure minimized. The bevel registers. A bevel-ground edge gives the hand a felt angle in the cut — let the facet ride the work rather than fighting it flat. HSS wants changing, not grinding. The value proposition is wear life; when the edge finally goes, the discipline is to feed a fresh blade, not to chase a hand-honed edge HSS is slower to take than carbon. A light touch-up on a fine stone between changes is fine; heavy re-grinding defeats the reason you paid for HSS. If the profile is curved, honing follows the sweep (inside the curve, burr stropped off the outside) rather than flat on a bench stone — but this technique branch is unauthored pending identity, because it only applies if the store's "short curve" title is the true one.
Asked at the counter
BUYER QUESTIONS ANSWERED BEFORE THE CART, NOT AFTER THE RETURN
Is this a straight blade or a curved one?
Hyde's records disagree — catalog/hydetools say straight bevel (3551M); the store title says "short curve" (BG469). We will not represent one over the other until Hyde confirms what ships .
How is it different from the 62875?
On paper, only a variant tag (15 Gauge vs the 62875's 16 Gauge), whose meaning is itself unresolved — so we make no functional distinction between them . Match your plant's incumbent pattern.
What handle fits it?
Unknown from the record. The catalog width (.690") falls between the handle capacities, and no handle claim covers it . Ask Hyde before pairing.
Why HSS?
Wear life against abrasive stock — synthetic cord, filled fiber, rubberized fabric — and longer intervals between blade changes. That is what the price buys; it is not a keener hand-honing edge than carbon.
What is it for?
The bevel-grind HSS job class: dense, abrasive, edge-rolling stock at the bench. The exact cut depends on the profile we can't yet confirm.
