Hyde Tools 60630 Square Point Knife, Wood Handle | the Hyde Store
Square Point Industrial Knives — Primary Tool
№60630

Hyde Tools 60630 Regular Square Point Knife

MODEL 60630 · SKU H-60630 · UPC 079423606304
CHECK THIS AGAINST MY JOB
$15.15 PER UNIT · SINGLE UNIT UNIT PRICE

Selected subtotal: $15.15. Standard US shipping is $9.99 below $15, $7.99 from $15 to below $49, and free at $49 after discounts. Freight items excluded; other rates are shown at checkout.

IN STOCK
✓ SAME-DAY DISPATCH — ELIGIBLE IN-STOCK ORDERS BY 2 PM ET
✓ STANDARD US SHIPPING — $9.99 BELOW $15 · $7.99 FROM $15 · FREE AT $49 AFTER DISCOUNTS
✓ LOCAL PICKUP — FALL RIVER
✓ NET-30 & PO — APPROVED ACCOUNTS
Regular Square Point Knife

Official Hyde specifications

Size
6" x 1" x .065"
PRODUCT FIT · IS THIS THE RIGHT TOOL? Straight answers. If it's the wrong tool for your job, we'll say so.

The guidance below describes applications and limitations. For a match to your particular job or an existing tool, ask us to confirm fit.

CHECK THIS AGAINST MY JOB →

Is this the right tool for your job?

✕CHOOSE A DIFFERENT TOOL WHEN
  • Deep, dense, or thick bun foam — the flat grind wedges; the hollow-ground 6" blades (60720/60750) are the foam knives, and the 4" hollow 60180/60480 for smaller work.
  • Reinforced belting cover and dense gasket — the .065" deflects; buy the .083" 60450/60510, or the 8" heavy blades for wide belt.
  • Slabbing thick layers off a paper roll — that reach-into-the-roll job belongs to the 8" 60780/60810/60870.
  • Prying, scraping, and can-opening — the hardened edge chips.

Jobs this tool does

EXACT JOB METHODS FOR HYDE №60630
Job guide How to Clear Wraps and Lap-Ups from Machine RollsOPEN JOB GUIDE

For these jobs—use this instead

THE JOB, THE REASON, AND THE BETTER TOOL
Deep, dense, or thick bun foam The flat grind wedges; the hollow-ground 6" blades (60720/60750) are the foam knives, and the 4" hollow 60180/60480 for smaller work. BETTER TOOL Hollow Ground Square Point Knife (BG145) 60720 Reinforced belting cover and dense gasket The .065" deflects; buy the .083" 60450/60510, or the 8" heavy blades for wide belt. BETTER TOOL Square Point Knife, Wood Handle 60450 Slabbing thick layers off a paper roll That reach-into-the-roll job belongs to the 8" 60780/60810/60870. BETTER TOOL Square Point Knife, Wood Handle 60780

How the pros run it

01

Pull the whole edge

A 6" blade earns its keep on the single long draw — engage the full length and pull through, rather than sawing with a short section. It is the cleanest cut a hand knife makes on wide, flexible sheet.
02

Protect the layer beneath

The square end is your insurance against scoring the good paper under a roll wrap or the foam under a cover — keep the blade low and let the corner ride the surface; the moment you steepen the angle, the corner starts to dig.
03

Low and sliced on cloth; scribed and progressive on gasket and rubber

Textiles cut with a low slicing draw under tension; dense sheet cuts with repeated scribed passes down the same line. The blade is the same; the stroke changes with the material.
04

Maintain the high-carbon edge

Hone on a stone, strop, and wipe dry after damp work. A long blade holds a lot of edge — keep all of it keen, because a dull section in the middle of a long draw shows as a drag mark in the cut.

Asked before buying

BUYER QUESTIONS, ANSWERED BEFORE YOU ORDER
Why the 6" and not the 5"?
Reach. A 6" edge opens a wide gasket or a full roll wrap in one draw; below that you're taking a second stroke.
Can it slab a damaged paper roll?
For deep slabbing use the 8" 60780/60810/60870 — this is the wrap-and-header knife. It reaches the wrap; the 8" reaches the roll.
Will it cut foam?
Soft, shallow foam yes; for dense or thick bun foam the hollow-ground 6" blades (60720/60750) don't wedge.
Belting?
Light material only; reinforced belt cover wants the .083" gauge.
Sharpening?
Maintained high-carbon — hone the full length, strop, wipe dry.

Compare Hyde models

Crew & facility ordering

Model & SKUModel 60630 · SKU H-60630 · UPC 079423606304
Product-specific quantity pricingSee this product’s published tiers above. Eligible discounts apply automatically at checkout.
PO & NET-30Approved contractors, facilities, schools and government buyers can route through Hyde Pro.
BUY FOR A CREW OR FACILITY →

Reviews

Specs & documentation

Full specification details
catalog product name
Regular Square Point Knife
specifications
size: 6" x 1" x .065"
official product name
Square Point Knives
official variant identity
60630 — 6" x 1" x .065"
Hyde official catalog evidence ↗Hyde Tools manufacturer source ↗
$15.15PER UNIT · H-60630