Hyde Tools 28060 PROShield® Spray Shield, 24” x 9” Flexible Polystyrene | the Hyde Store
Paint Spray And Edge Shields — Primary Tool
№28060

Hyde Tools 28060 24" x 9" Flexible Spray Shield

BEST FOR · Jobs explicitly linked by authored Hyde application guides.
MODEL 28060 · SKU H-28060 · UPC 079423280603
CHECK THIS AGAINST MY JOB
$26.98 PER UNIT · SINGLE UNIT UNIT PRICE

IN STOCK
✓ SAME-DAY DISPATCH — ELIGIBLE IN-STOCK ORDERS BY 2 PM ET
✓ FREE SHIPPING — ORDERS OVER $30
✓ LOCAL PICKUP — FALL RIVER
✓ NET-30 & PO — APPROVED ACCOUNTS
Documented for Paint Baseboards over Carpet with a Shield — The Complete Step-by-Step Guide; Paint Clean Base Lines Over Carpet — The Complete Step-by-Step Guide; How to Spray a Ceiling Without Masking the Walls — The Complete Step-by-Step Guide; plus 2 more documented jobs.

Official Hyde specifications

PivotNeck system adjusts to any angle. 18" Acme-threaded hardwood handles
PRODUCT FIT · IS THIS THE RIGHT TOOL? Straight answers. If it's the wrong tool for your job, we'll say so.

Choose this when: Jobs explicitly linked by authored Hyde application guides.

CHECK THIS AGAINST MY JOB →

Is this the right tool for your job?

✓CHOOSE THIS WHEN
  • The documented job is “Paint Baseboards over Carpet with a Shield — The Complete Step-by-Step Guide”.
  • The documented job is “Paint Clean Base Lines Over Carpet — The Complete Step-by-Step Guide”.
  • The documented job is “How to Spray a Ceiling Without Masking the Walls — The Complete Step-by-Step Guide”.
  • The documented job is “Spray Closets, Stairwells, and Tight Spaces — The Complete Step-by-Step Guide”.
  • The documented job is “How to Spray Walls to a Crisp Ceiling Line — The Complete Step-by-Step Guide”.
✕CHOOSE A DIFFERENT TOOL WHEN
  • Not for solvent-borne coatings or their cleanup — lacquer, oil enamels, shellac, two-part finishes, and their thinners attack polystyrene; that entire world belongs to the aluminum members, and at this length specifically to the 28010.
  • Not for line-is-the-product work: flexible edges follow hands as faithfully as walls, and crisp two-tone breaks at this scale want the rigid 28020 — there is no stiff polystyrene at any length, per the line's stated assortment gap.
  • Not for stride: open perimeters and hallway runs triple this blade's placements; the 28050 and the aluminum 36s own the long walls.
  • Not a masking substitute: fog settles on the whole room, so the film and drops stay in every plan this blade appears in.

Jobs this tool does

EXACT JOB METHODS FOR HYDE №28060
Job guide Paint Baseboards over Carpet with a ShieldOPEN JOB GUIDE Job guide Paint Clean Base Lines Over CarpetOPEN JOB GUIDE Job guide Replace a Spray-Shield HandleOPEN JOB GUIDE Job guide Shield High Lines from the Floor on a PoleOPEN JOB GUIDE
VIEW 3 MORE DOCUMENTED JOBS
Job guide How to Spray a Ceiling Without Masking the WallsOPEN JOB GUIDE Job guide Spray Closets, Stairwells, and Tight SpacesOPEN JOB GUIDE Job guide How to Spray Walls to a Crisp Ceiling LineOPEN JOB GUIDE

How the pros run it

01

Bow calibration

short blades take less pressure to seat than long ones — press to full-edge contact and stop; over-bowing lifts the tips and under-fogs the corners. The awning is non-negotiable: face toward the gun, set at the PivotNeck, checked whenever the work changes direction. Lift, never slide: sliding drags the bead down the line it just protected. Gun parallel, never raking toward the tip. Water cleanup only: damp rag mid-job, wash and dry at day's end; solvent touches this blade never. Storage: hung or flat, away from heat, nothing resting on the edge (heat-softening caution is authored polystyrene knowledge, not a Hyde claim) — the working inch is the whole tool.

Asked before buying

BUYER QUESTIONS, ANSWERED BEFORE YOU ORDER
Is this the shield to learn on?
Yes — the line's queue names the light poly 24 the learner's shield, and 2a teaches the whole craft on it: awning angle, bow to contact, lift, overlap, wipe.
What's the difference from the 28010?
Material only — same 24" x 9", same flex, same neck and handle. The 28010's aluminum shrugs off solvents forever; this blade is lighter, friendlier to buy, and strictly waterborne.
Can I use it with spray cans?
Yes — hand-scale aerosol lines are its natural bench work (2d) , with one caution: many aerosols are solvent-based, so wipe promptly and never soak this blade in solvent.
How do I clean it?
Water, damp rag, done. Solvent is the one thing that damages this blade faster than work does.
Does the handle come in the box? Does a pole fit?
The 18" Acme hardwood handle is the family claim (box contents unstated per-SKU); pole fitment is the family inference (official wording only on the 28100). Verify both before relying on either.
Why did a straight paint line appear on the surface I was protecting?
The edge's wet bead printed — wipe every few placements before it forms, and lift rather than slide (2f).
When do I replace it?
When dried buildup or a rounded edge stops it sealing — retirement is the maintenance plan, and at this SKU's cost the least eventful in the family (2f).

Compare Hyde models

Crew & facility ordering

Model & SKUModel 28060 · SKU H-28060 · UPC 079423280603
Unit pricingThe displayed unit price applies at all quantities. Ask Hyde Pro about account-specific purchasing needs.
PO & NET-30Approved contractors, facilities, schools and government buyers can route through Hyde Pro.
BUY FOR A CREW OR FACILITY →

Reviews

Specs & documentation

Full specification details
catalog product name
24" x 9" Flexible Spray Shield
official family claim
PivotNeck system adjusts to any angle. 18" Acme-threaded hardwood handles.
official family claim
PivotNeck system adjusts to any angle
official family claim
18" Acme-threaded hardwood handles
official product name
PROShield® Spray Shields (Polystyrene)
official variant identity
28060 — 24"
Hyde official catalog evidence ↗Hyde Tools manufacturer source ↗
$26.98PER UNIT · H-28060