Hyde Tools 04124 3" Value Series (1/4"x5/32" V - notch) | the Hyde Store
Adhesive Spreaders And Notched Tools — Primary Tool
№04124

Hyde Tools 04124 3" Value Series™ Adhesive Spreader 1/4" x 5/32" V-notch

MODEL 04124 · SKU H-04124 · UPC 079423041242
CHECK THIS AGAINST MY JOB
$4.79 PER UNIT · SINGLE UNIT UNIT PRICE

IN STOCK
✓ SAME-DAY DISPATCH — ELIGIBLE IN-STOCK ORDERS BY 2 PM ET
✓ FREE SHIPPING — ORDERS OVER $30
✓ LOCAL PICKUP — FALL RIVER
✓ NET-30 & PO — APPROVED ACCOUNTS
3" Value Series™ Adhesive Spreader 1/4" x 5/32" V-notch
Blade material
Carbon steel
Hyde specifies
Handle material
Polypropylene
Hyde specifies
THE COUNTER · PRODUCT FIT Straight answers. If it's the wrong tool for your job, we'll say so.

Exact job fit is not yet established for this product.

CHECK THIS AGAINST MY JOB →

Is this the right tool for your job?

✕DO NOT FORCE THE FIT
  • Floor and wet-area tile in thinset. Wrong adhesive class and wrong notch — cementitious thinset wants standing square ridges (19050 for medium tile, 19070 for large/quarry/pavers). A V bead can't hold a floor tile's bed.
  • Room-scale spreading. Three inches of edge is a repair-and-detail width; a whole floor or wall of gallons is the 9-inch trowel's job (19030 in this V geometry).
  • Sheet resilient goods where the meter telegraphs. Sheet vinyl and VCT want fine U or fine square meters laid almost paint-thin; a 1/4" V is both too open and the wrong ridge shape, and its ridges would read through the finished floor in raking light. Those are the fine-square/U members' jobs.
  • The throwaway solvent job. If the adhesive is a solvent-based contact cement you have no intention of cleaning off, the honest tool is the one-piece plastic V (05532), not this carbon blade you'd have to scrub.
  • Mosaic and fine tile. A sheet-mounted mosaic drowns over a 1/4" V — adhesive squeezes up through every joint of the sheet. Step down to the fine square (04126) or fine V (19032).

Jobs this tool does

EXACT JOB METHODS FOR HYDE №04124
Counter-checked How to Clean and Maintain Adhesive TrowelsOPEN JOB GUIDE Counter-checked How to Match the Notch to the Covering and Adhesive — Let the Exact System Documents Choose the MeterOPEN JOB GUIDE Counter-checked How to Repair Small Areas of Flooring and TileOPEN JOB GUIDE Counter-checked How to Set Ceramic Wall Tile in MasticOPEN JOB GUIDE
VIEW 1 MORE DOCUMENTED JOB
Counter-checked Wallboard and Panel Adhesive WorkOPEN JOB GUIDE

How the pros run it

01

Angle is a second meter

Hold the blade at roughly 45° to the surface; flatter under-meters (starved bond), steeper over-meters (squeeze-out and telegraphing). The notch sets the volume, but only if the angle is disciplined. One direction, straight ridges — never swirl; swirls trap air. Thin means thin: mastic and most panel adhesives applied too heavy never fully cure under the covering, so resist the urge to lay more than the notch gives you. Keep the edge true: a V spreader's whole accuracy lives in the notch profile; dress a rolled or dinged edge with a file held square, and retire the blade when a notch tooth is worn or nicked, because a worn meter quietly under-delivers on every job after it. Wash before it sets — organic mastics and construction adhesives clean up on their label's schedule, and a blade left to skin loses its meter to a crust you'll have to pry off (and pry a notch out of true in the process).

Asked at the counter

BUYER QUESTIONS ANSWERED BEFORE THE CART, NOT AFTER THE RETURN
What does the 1/4" × 5/32" mean?
The first figure, 1/4", is the notch width — the size that sets how much adhesive the V meters. The second figure is the catalog's remaining dimension for the notch; the packet gives no official key for reading it as depth versus spacing, so we quote it and don't interpret it .
Can I set floor tile with it?
No — floor tile wants cementitious thinset combed with a square notch (19050/19070). This V spreader is for wall tile in mastic, plus wallboard and metal work.
Why a V and not a square?
A V carries about half the adhesive of a same-width square, which is exactly what thin-bodied mastic and panel adhesive want; a square would lay too heavy a bed for them.
Do I need this or the plastic one?
If you'll do this kind of work more than once and want a tool that cleans up and lasts, this carbon-steel Value Series blade; if it's a one-time solvent-adhesive job, the plastic 05532 you can throw away.
How do I keep it?
Wash it before the adhesive skins, keep the notch teeth square and unnicked, and retire the blade when the meter wears — a worn notch under-delivers silently.

Compare Hyde models

Crew & facility ordering

Model & SKUModel 04124 · SKU H-04124 · UPC 079423041242
Quantity pricingPublished tiers apply automatically at checkout. Private account prices are never invented.
PO & NET-30Approved contractors, facilities, schools and government buyers can route through Hyde Pro.
BUY FOR A CREW OR FACILITY →

Reviews

Customer Reviews

Based on 1 review
100%
(1)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
v
vincent mendola (New York, US)

Hyde Tools 04124 3" Value Series (1/4"x5/32" V-notch)

Specs & documentation

Full spec sheet
catalog product name
3" Value Series™ Adhesive Spreader 1/4" x 5/32" V-notch — OFFICIAL EXACT MODEL
specifications
Blade Material: Carbon steel — OFFICIAL EXACT MODEL
specifications
Handle Material: Polypropylene — OFFICIAL EXACT MODEL
official family claim
Carbon steel. Polypropylene handle. For wallboard, metal, and ceramic tile. — OFFICIAL FAMILY CLAIM APPLICABLE TO EXACT LISTED MODEL
official product name
Adhesive Spreaders — OFFICIAL EXACT VARIANT
official variant identity
04124 — Value Series™ / Carbon Steel / 1/4" x 5/32" V-notch — OFFICIAL EXACT VARIANT
Hyde official catalog evidence ↗Hyde Tools manufacturer source ↗
$4.79SKU H-04124