4" E - Volution Roller Cover 3/8" Nap, 1 1/2" core (Pack 2) | the Hyde Store
E-Volution Roller Covers — Roller Covers
№47353

Hyde Tools 47353 4" E-volution® Roller Cover, 3/8" Nap, 2-Pack

MODEL 47353 · SKU H-47353 · UPC 079423473531
CHECK THIS AGAINST MY JOB
$5.57 PER UNIT · SINGLE UNIT UNIT PRICE

IN STOCK
✓ SAME-DAY DISPATCH — ELIGIBLE IN-STOCK ORDERS BY 2 PM ET
✓ FREE SHIPPING — ORDERS OVER $30
✓ LOCAL PICKUP — FALL RIVER
✓ NET-30 & PO — APPROVED ACCOUNTS
4" E-volution® Roller Cover, 3/8" Nap, 2-Pack
Dimensions
4 in, 100 mm
Hyde specifies
Core
1 1/2-INCH
Hyde specifies
Package
2-Pack
Hyde specifies
Official feature
ideal for interior super smooth applications
Hyde specifies
Official feature
100% lint-free roller
Hyde specifies
THE COUNTER · PRODUCT FIT Straight answers. If it's the wrong tool for your job, we'll say so.

Exact job fit is not yet established for this product.

CHECK THIS AGAINST MY JOB →

Is this the right tool for your job?

✕DO NOT FORCE THE FIT
  • Painting a whole wall. It is 4" wide; a full wall is a 9" cover's job (47302 for the finish, 47328 for the workhorse). The 47353 is a blend-and-detail cover, not a field cover, and using it to roll a room is an afternoon spent reloading.
  • Cabinet-interior and tight-carcass work. Here the standard mini's small diameter is the feature — it fits inside a cabinet box and into reveals the fat 1-1/2" core cannot enter. That is the 47317/47314 mini's world, not this cover's; the very core that makes the 47353 blend into a wall makes it too big for a drawer box.
  • Texture and masonry. E-volution microfiber snags, frays, and tears on stucco, brick, and block — Hyde says so outright. Rough surfaces are the Lamb Pro polyester family's job (47365, 47366).
  • Glass-smooth gloss doors where zero stipple is the point. At 3/8" this cover still lays a wall's stipple; a cabinet door read under kitchen light wants the shorter 1/4" nap or foam. Right fabric, wrong nap for that one job.

Jobs this tool does

EXACT JOB METHODS FOR HYDE №47353
Counter-checked How to Touch Up a Wall InvisiblyOPEN JOB GUIDE

How the pros run it

01

Match it to the wall's cover, or the blend is pointless

The entire value proposition assumes the field was rolled with a 9" E-volution microfiber at a comparable nap; blend into a wall rolled with a knit or a woven and the fabrics' stipples still differ, if less than a mini's would. Know what painted the wall before you trust the touch-up. Pre-dampen for waterborne paint — roll the dry cover on a damp rag and spin it out, or the microfiber's first load vanishes into the fibers instead of the wall. De-lint once before its first job — even a lint-free cover carries a few loose fibers from manufacture; wrap it in painter's tape and pull it off. Light hand, always — this is Hyde's own headline caution on E-volution: the massive capacity wants a lighter touch, and a heavy hand on a small surface overloads it. Land paint on bare surface first, never against your finished wet edge, and feather outward. Wash to clear water — microfiber holds paint deep and rinses slowly; stop when the water runs clear, not "mostly clear," and stand it on end to dry so it never develops a flat spot.

Asked at the counter

BUYER QUESTIONS ANSWERED BEFORE THE CART, NOT AFTER THE RETURN
Why is a 4" cover on a big 1-1/2" core?
So it lays the same film and stipple as a 9" cover and can blend a repair into a 9"-rolled wall invisibly (§2a). That is the entire point of the product.
Isn't this just a mini roller?
No — and the difference decides purchases. A mini rides a thin wire spindle and lays a finer, thinner film that flashes against a 9"-rolled wall; this rides a standard cage arm and matches it (§5).
Will it fit my regular 4" mini frame?
Only a frame built for a 1-1/2"-core 4" cover — which is what ships in the 47354. A thin-spindle mini frame will not seat it.
What comes in the 2-pack?
Two covers, no frame (§2d). Buy the 47354 if you need the frame.
Can I paint a whole small room with it?
You can, but you shouldn't — it is a blend-and-detail cover; a 9" does a room in a fraction of the passes (§4).
Will it work on my textured wall?
As microfiber, no — it is a smooth-to-semi-smooth fabric that tears on real texture (§4); match a textured wall with the Lamb Pro naps.

Compare Hyde models

Crew & facility ordering

Model & SKUModel 47353 · SKU H-47353 · UPC 079423473531
Quantity pricingPublished tiers apply automatically at checkout. Private account prices are never invented.
PO & NET-30Approved contractors, facilities, schools and government buyers can route through Hyde Pro.
BUY FOR A CREW OR FACILITY →

Reviews

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

Specs & documentation

Full spec sheet
catalog product name
4" E-volution® Roller Cover, 3/8" Nap, 2-Pack — OFFICIAL EXACT MODEL
specifications
Core: 1 1/2-INCH — OFFICIAL EXACT MODEL
package information
2-Pack — OFFICIAL EXACT MODEL
official family claim
100% lint-free roller, ideal for interior super smooth applications. Best with semi-gloss and high-gloss finishes. — OFFICIAL FAMILY CLAIM APPLICABLE TO EXACT LISTED MODEL
official family claim
100% lint-free roller — OFFICIAL FAMILY CLAIM APPLICABLE TO EXACT LISTED MODEL
official family claim
ideal for interior super smooth applications — OFFICIAL FAMILY CLAIM APPLICABLE TO EXACT LISTED MODEL
official family claim
Best with semi-gloss and high-gloss finishes — OFFICIAL FAMILY CLAIM APPLICABLE TO EXACT LISTED MODEL
official product name
E-volution® 4" Roller Covers: 1-1/2" Core, 3/8" Nap, 2-Pack — OFFICIAL EXACT VARIANT
official variant identity
47353 — OFFICIAL EXACT VARIANT
official package image fact
Package-observed dimensions or capacities: 4IN, 100 MM. — OFFICIAL EXACT MODEL
Hyde official catalog evidence ↗Hyde Tools manufacturer source ↗Hyde official catalog evidence ↗
$5.57SKU H-47353