Selected subtotal: $22.11. Standard US shipping is $9.99 below $15, $7.99 from $15 to below $49, and free at $49 after discounts. Freight items excluded; other rates are shown at checkout.
IN STOCK
✓SAME-DAY DISPATCH — ELIGIBLE IN-STOCK ORDERS BY 2 PM ET
✓STANDARD US SHIPPING — $9.99 BELOW $15 · $7.99 FROM $15 · FREE AT $49 AFTER DISCOUNTS
✓LOCAL PICKUP — FALL RIVER
✓NET-30 & PO — APPROVED ACCOUNTS
Hyde 80909
PRODUCT FIT · IS THIS THE RIGHT TOOL?Straight answers. If it's the wrong tool for your job, we'll say so.
The guidance below describes applications and limitations. For a match to your particular job or an existing tool, ask us to confirm fit.
The straight tip can't point into a corner or draw a fine line the way an angled toe can; a wall-to-ceiling cut, a two-color seam, or a trim edge is angular-sash work (80804, 80814, and the 2″/2-1/2″ sashes).
Not the fine-finish, glass-smooth interior brush — Chinex is stiff and hog-like, superb for heavy and exterior work but not the tool for a mirror lay-off on fine interior trim, where a softer SRT or natural bristle leaves less texture.
Not a small-detail brush at 3″.
Not a scrub or prep brush — it's an applicator, and grit destroys the tip.
Cover the face with loaded strokes, then level it with a light, near-dry pass of the flat tip in one direction — the tipping-off pass is what leaves a uniform face. Go with the grain on wood for both the lay-on and the tip-off. Use the stiffness to move heavy paint — Chinex is meant to push thick, fast-flashing coatings; let the backbone work rather than overloading the brush. Load one-third, tap don't scrape — protect the reservoir and the heel. Straight tip cuts only roughly — you can run the square edge or a corner along a line, but it will never cut like an angled toe; for real cut-in, pick up an angular sash. Waterborne is the point — Chinex exists to bring natural-bristle stiffness to latex/acrylic; it will move oil, but its reason for being is water-based paint. Clean to the heel and comb straight every session (line-wide care rule).
Asked before buying
BUYER QUESTIONS, ANSWERED BEFORE YOU ORDER
Straight or angular — why is this one different?
It's a straight square-tip brush for laying off flat faces (doors, boards, wide trim), not an angular sash for cutting lines. Different job (§1, §5).
What is Chinex, and why would I want it?
A stiff engineered filament that imitates china (hog) bristle's stiffness but works in water-based paint — prized for heavy coatings and hot-weather exterior work where a soft brush goes limp (§1). The specific brand attribution is unverified here .
Can I cut in with it?
Only roughly, with the square edge — for a real cut line use an angular sash (80804/80814 at this width) (§3, §4).
Latex or oil?
Built for waterborne paint; Chinex's whole purpose is stiffness in latex/acrylic. It moves oil but isn't the varnish brush (§3, §4).
80909 or the SRT brushes for my doors?
Chinex for heavy paint and durability; SRT (80841) for the finest mark-free finish on scrutinized surfaces (§5).
How do I lay off a flat door without brush marks?
Cover the face, then tip off with a light, near-dry pass of the flat tip in one direction along the grain (§2a, §3).
