Richard Optimum Ellipse XL 2 - 1/2" Oval Angled Paint Brush 80768 | the Hyde Store
Oval And Ellipse High Capacity Brushes — Primary Tool
№80768

Hyde Tools 80768 FATBOY XL

MODEL 80768 · SKU H-80768 · UPC 066395807686
CHECK THIS AGAINST MY JOB
$18.96 PER UNIT · SINGLE UNIT UNIT PRICE

IN STOCK
✓ SAME-DAY DISPATCH — ELIGIBLE IN-STOCK ORDERS BY 2 PM ET
✓ FREE SHIPPING — ORDERS OVER $30
✓ LOCAL PICKUP — FALL RIVER
✓ NET-30 & PO — APPROVED ACCOUNTS
FATBOY XL

Documented Hyde specifications

official product or family name
FATBOY XL
PRODUCT FIT · IS THIS THE RIGHT TOOL? Straight answers. If it's the wrong tool for your job, we'll say so.

The guidance below describes applications and limitations. For a match to your particular job or an existing tool, ask us to confirm fit.

CHECK THIS AGAINST MY JOB →

Is this the right tool for your job?

✕CHOOSE A DIFFERENT TOOL WHEN
  • Crisp interior finish lines — a flat angular sash (PRO MILLENIUM 80803, CONNOISSEUR 80752) cuts sharper; the XL oval is built for capacity, not a razor edge.
  • Light, controlled, all-day precision — the lighter Optimum Ellipse LS (80763) is the more controllable 2-1/2" oval when you don't need the maximum reservoir.
  • Tight or small work — too much brush for muntins and small trim.
  • Square-tip lay-off — a straight oval (Fat Boy 80737) lays a flat face without a cut.
  • A coating the filament isn't matched to — verify the fiber before oil or a critical finish.

Jobs this tool does

EXACT JOB METHODS FOR HYDE №80768
Job guide How to Paint Exterior Siding and TrimOPEN JOB GUIDE

For these jobs—use this instead

THE JOB, THE REASON, AND THE BETTER TOOL
Crisp interior finish lines A flat angular sash (PRO MILLENIUM 80803, CONNOISSEUR 80752) cuts sharper; the XL oval is built for capacity, not a razor edge. BETTER TOOL 2-1/2'' Angular Paint Brush, PRO 80803 Light, controlled, all-day precision The lighter Optimum Ellipse LS (80763) is the more controllable 2-1/2" oval when you don't need the maximum reservoir. BETTER TOOL Optimum Ellipse LS 2-1/2" Oval Angled 80763 Square-tip lay-off A straight oval (Fat Boy 80737) lays a flat face without a cut. BETTER TOOL Fat Boy 80737 XL 2-1/2" Oval Straight 80737

How the pros run it

01

Load deep and work the belly

the XL's entire advantage is the reservoir, so charge it fully and tap the drips; but respect that a maximum-capacity oval full of paint will sheet down a vertical face if you overload the ferrule, so keep the load in the belly, not the neck. Cut off the long point; the big body carries. Long, steady, unhurried strokes let the reservoir do the work; leaning hard just splays the oval. Steer with the point, keep the face flat so the round body doesn't roll. Expect a full line, not a fine one — this is a capacity cutter. Tip off and keep the wet edge alive — the XL covers ground fast enough to pass fast latex's open time.

Asked before buying

BUYER QUESTIONS, ANSWERED BEFORE YOU ORDER
What makes the XL different from the LS (80763)?
The XL carries the maximum-capacity Fat Boy designation — more paint behind the same 2-1/2" angled tip; the LS is the lighter, more controllable body.
How is it different from the Fat Boy 80733?
It largely isn't — same 2-1/2" oval-angled tool in the same maximum-capacity family, under a different badge.
Crisp line?
No — a flat sash cuts crisper; the XL trades edge for maximum capacity.
Best use?
The longest, thirstiest cut lines where reloading is the time cost.
What bristle?
Not published — match to your coating and confirm on the listing (§8).

Compare Hyde models

Crew & facility ordering

Model & SKUModel 80768 · SKU H-80768 · UPC 066395807686
Product-specific quantity pricingSee this product’s published tiers above. Eligible discounts apply automatically at checkout.
PO & NET-30Approved contractors, facilities, schools and government buyers can route through Hyde Pro.
BUY FOR A CREW OR FACILITY →

Reviews

Specs & documentation

Full specification details
official product or family name
FATBOY XL
Richard manufacturer source ↗
$18.96PER UNIT · H-80768