Hyde Tools 46842 MAXXGRIP PRO® SS 11" Wire Brush | the Hyde Store
Wire And Bristle Brushes — Primary Tool
№46842

Hyde Tools 46842 11" Stainless Steel Wire Brush

BEST FOR · High-Density Wire Bristles: More bristles per square inch for maximum cleaning efficiency.
MODEL 46842 · SKU H-46842 · UPC 079423468421
CHECK THIS AGAINST MY JOB
$9.64 PER UNIT · SINGLE UNIT UNIT PRICE

Selected subtotal: $9.64. Standard US shipping is $9.99 below $15, $7.99 from $15 to below $49, and free at $49 after discounts. Freight items excluded; other rates are shown at checkout.

IN STOCK
✓ SAME-DAY DISPATCH — ELIGIBLE IN-STOCK ORDERS BY 2 PM ET
✓ STANDARD US SHIPPING — $9.99 BELOW $15 · $7.99 FROM $15 · FREE AT $49 AFTER DISCOUNTS
✓ LOCAL PICKUP — FALL RIVER
✓ NET-30 & PO — APPROVED ACCOUNTS
High-Density Wire Bristles: More bristles per square inch for maximum cleaning efficiency.

Official Hyde specifications

Brush area measures
5-1/2" x 1"
Stainless Steel Bristles
Corrosion-resistant, ideal for tough and wet jobs
High-Density Wire Bristles
More bristles per square inch for maximum cleaning efficiency
Ergonomic Soft-Grip Handle
Ensures comfort and reduces hand fatigue during extended use
More 12-gauge (.40 mm) wire bristles per square inch
PRODUCT FIT · IS THIS THE RIGHT TOOL? Straight answers. If it's the wrong tool for your job, we'll say so.

Choose this when: High-Density Wire Bristles: More bristles per square inch for maximum cleaning efficiency.

CHECK THIS AGAINST MY JOB →

Is this the right tool for your job?

✓CHOOSE THIS WHEN
  • High-Density Wire Bristles: More bristles per square inch for maximum cleaning efficiency.
  • Stainless Steel Bristles: Corrosion-resistant, ideal for tough and wet jobs.
  • Ergonomic Soft-Grip Handle: Ensures comfort and reduces hand fatigue during extended use.
✕CHOOSE A DIFFERENT TOOL WHEN
  • Carbon and mild steel.
  • Never run the 46842 on ferrous work, even once.
  • One pass on mild steel loads the stainless fill with carbon particles, and from then on the brush deposits them into the next stainless surface — by fabricator doctrine it's demoted to carbon duty for life (iron-contamination doctrine verified against The Fabricator, the AWS D1.6 forum, and finishing.com; Hyde's stainless alloy is unpublished — never claim 304/316).
  • For mild-steel welds and rust, that's the carbon 46841's job.
  • Broad flat fields. For pressing wire into a wide flat plane under body weight, the stainless scrub block (46838) puts more fill into the surface than a handled brush. The 46842's strength is lines, welds and profiles.

For these jobs—use this instead

THE JOB, THE REASON, AND THE BETTER TOOL
For mild-steel welds and rust, that's the carbon 46841's job For mild-steel welds and rust, that's the carbon 46841's job. BETTER TOOL MAXXGRIP PRO® High Carbon Steel 11" 46841 Broad flat fields For pressing wire into a wide flat plane under body weight, the stainless scrub block (46838) puts more fill into the surface than a handled brush. The 46842's strength is lines, welds and profiles. BETTER TOOL MAXXGRIP PRO® SS 8" Wire Brush 46838

How the pros run it

01

Track the face along the line

run the 5-1/2" face down the weld or seam and stroke in that direction — the in-line handle is there so you can aim it. Let the tips cut: moderate pressure, long strokes; the dense .40mm stainless fill works at the tips, and over-leaning folds and sets the wire. Dedicate and mark it: this is the maintenance ritual that replaces carbon's dry-and-oil routine — stainless won't bloom rust, but it must be kept out of the carbon-brush pile or it stops being a stainless brush. Passivation follow-up: brushing cleans and can help, but where a job spec calls for chemical passivation of stainless, the brush is the mechanical step, not a substitute for it.

Asked before buying

BUYER QUESTIONS, ANSWERED BEFORE YOU ORDER
Why stainless if carbon cuts faster?
Because on stainless and aluminum, carbon wire leaves iron that later rusts and pits the metal. Stainless leaves none — that's the point, not moisture resistance.
Can I use it on regular steel once?
No — one pass on mild steel contaminates the brush permanently and it can't be trusted on stainless again.
Is it 304 or 316?
The alloy isn't published — it's stainless wire, and that's as far as the claim goes.
Does brushing passivate the stainless?
It mechanically cleans the weld; where a spec requires chemical passivation, the brush is the prep step, not a replacement.
Block or handle?
Handle (this) for welds, seams and profiles you stroke along; the stainless block (46838) for pressing down on flat stainless fields.
Why the finger guard?
A scratch brush skips off hard beads and edges — the molded protector is there for that.

Compare Hyde models

Crew & facility ordering

Model & SKUModel 46842 · SKU H-46842 · UPC 079423468421
Product-specific quantity pricingSee this product’s published tiers above. Eligible discounts apply automatically at checkout.
PO & NET-30Approved contractors, facilities, schools and government buyers can route through Hyde Pro.
BUY FOR A CREW OR FACILITY →

Reviews

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

Specs & documentation

Full specification details
catalog product name
11" Stainless Steel Wire Brush
specifications
Brush area measures: 5-1/2" x 1"
official family claim
More 12-gauge (.40mm) wire bristles per square inch with sturdy, soft-grip ergonomic handles and finger protectors.
official family claim
More 12-gauge (.40mm) wire bristles per square inch
official family claim
sturdy, soft-grip ergonomic handles and finger protectors
official product name
Stainless Steel MAXXGRIP PRO® Wire Brushes
official variant identity
46842 — 11"
official description
MAXXGRIP PRO® Wire Brushes are perfect for professionals and DIY enthusiasts alike, featuring a high volume of 12-gauge (.40mm) stainless steel wire bristles per square inch for exceptional durability and performance. Designed for heavy-duty cleaning tasks, the ergonomic design includes a soft-grip handle for enhanced comfort and control, while the finger protectors add an extra layer of safety. Key Features: High-Density Wire Bristles: More bristles per square inch for maximum cleaning efficiency. Stainless Steel Bristles: Corrosion-resistant, ideal for tough and wet jobs. Ergonomic Soft-Grip Handle: Ensures comfort and reduces hand fatigue during extended use. Finger Protectors: Built-in safety feature to prevent injuries while working. Multiple Sizes: 8-3/4" w/ 3x3/4" Block 11" w/ 5-1/2x1" Block 11-3/4" w/ 6x1" Block
official feature
High-Density Wire Bristles: More bristles per square inch for maximum cleaning efficiency.
official feature
Stainless Steel Bristles: Corrosion-resistant, ideal for tough and wet jobs.
official feature
Ergonomic Soft-Grip Handle: Ensures comfort and reduces hand fatigue during extended use.
official feature
Finger Protectors: Built-in safety feature to prevent injuries while working.
corroborated construction material
Retailer/distributor listing independently repeats: stainless steel.
Hyde official catalog evidence ↗Hyde Tools manufacturer source ↗
$9.64PER UNIT · H-46842