Elegance And Tapered Trim Brushes — Primary Tool
№13518

Richard 13518 Tapered 3/4'' trim brush for latex paint with soft-grip handle

MODEL 13518 · SKU H-13518 · UPC 066395135185
CHECK THIS AGAINST MY JOB
$12.08 PER UNIT · SINGLE UNIT UNIT PRICE

Selected subtotal: $12.08. Standard US shipping is $9.99 below $15, $7.99 from $15 to below $49, and free at $49 after discounts. Freight items excluded; other rates are shown at checkout.

CURRENTLY UNAVAILABLE CONFIRM EXACT-MODEL SUPPLY WITH HYDE
SAME-DAY DISPATCH — ELIGIBLE IN-STOCK ORDERS BY 2 PM ET
STANDARD US SHIPPING — $9.99 BELOW $15 · $7.99 FROM $15 · FREE AT $49 AFTER DISCOUNTS
LOCAL PICKUP — FALL RIVER
NET-30 & PO — APPROVED ACCOUNTS
Hyde 13518
PRODUCT FIT · IS THIS THE RIGHT TOOL? Straight answers. If it's the wrong tool for your job, we'll say so.

The guidance below describes applications and limitations. For a match to your particular job or an existing tool, ask us to confirm fit.

CHECK THIS AGAINST MY JOB →

Is this the right tool for your job?

CHOOSE A DIFFERENT TOOL WHEN
  • Oil, alkyd, and varnish. Built for latex/waterborne paint; oil-based coatings, varnish, and oil stain belong to natural bristle (Hyde Extra 47380-series, Richard bristle brushes).
  • Cutting in walls and ceilings. The room cut line is a 1-1/2"–2-1/2" angular sash brush's job (Hyde Millenium 47370-series, Richard B5 sash family); a 3/4" trim brush is too narrow to cut a room at pace.
  • Broad faces and fields. A flush door field or a wide flat baseboard face is a flat brush's or roller's work; keep the trim brush to edges and members.
  • Fine muntins and slivers below its width. Divided-light bars a 3/4" overshoots want the 5/8" (13515).

Jobs this tool does

EXACT JOB METHODS FOR RICHARD №13518

For these jobs—use this instead

THE JOB, THE REASON, AND THE BETTER TOOL

How the pros run it

01

Dip the tip third only — spare the heel

Load a third to half of the bristle and keep paint out of the ferrule, where it dries and splays the brush permanently. Tap the excess off inside the can, don't wipe it over the rim and strip the reservoir. Set the edge and draw one pass: present the thin tapered tip to the line, begin just off the end, return into the corner, and pull a single smooth stroke, letting the edge steer the paint. Keep a wet edge in fast waterborne paint by working short lengths. Clean the heel first: rinse the latex under warm water, clear the paint from the base of the fill, comb the filaments parallel, shake or spin dry, and store in a keeper so the tapered edge stays square. Cleaned this way a synthetic trim brush lasts for years; dried loaded, it's scrap.

Asked before buying

BUYER QUESTIONS, ANSWERED BEFORE YOU ORDER
Why "for latex"?
Synthetic fill holds stiffness in water; natural bristle goes limp in waterborne paint.
Why is 3/4" the common one?
It carries a sash bar or narrow casing in one pass while keeping a clean line — the everyday trim width.
13518 or 13418 Elegance?
Same size and job; Elegance is the SRT finish upgrade, this the standard everyday tier. Buy up when the trim shows.
Oil-based paint?
Use natural bristle for oil and varnish; keep this for waterborne paint.
Making it last?
Keep paint out of the heel, clean the heel first, comb parallel, store in a keeper.

Compare Richard models

Crew & facility ordering

Model & SKUModel 13518 · SKU H-13518 · UPC 066395135185
COMMERCIAL STATECurrently unavailable online. Ask Hyde Pro to review exact-model supply and timing.
PO & NET-30Approved contractors, facilities, schools and government buyers can route through Hyde Pro.
BUY FOR A CREW OR FACILITY →

Reviews

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

Specs & documentation

Full specification details
$12.08PER UNIT · H-13518