Hyde Tools 12055 Stiff Brass Chisel Scraper, 3” | the Hyde Store
Stiff Scrapers And Putty Knives — Primary Tool
№12055

Hyde Tools 12055 3" Long Handle Brass Chisel Scraper

MODEL 12055 · SKU H-12055 · UPC 079423120558
CHECK THIS AGAINST MY JOB
$29.34 PER UNIT · SINGLE UNIT UNIT PRICE

IN STOCK
✓ SAME-DAY DISPATCH — ELIGIBLE IN-STOCK ORDERS BY 2 PM ET
✓ FREE SHIPPING — ORDERS OVER $30
✓ LOCAL PICKUP — FALL RIVER
✓ NET-30 & PO — APPROVED ACCOUNTS
3" Long Handle Brass Chisel Scraper

Official Hyde specifications

8" polypropylene handle
Brass non-spark blade
Measures 11-1/2" overall
PRODUCT FIT · IS THIS THE RIGHT TOOL? Straight answers. If it's the wrong tool for your job, we'll say so.

The guidance below describes applications and limitations. For a match to your particular job or an existing tool, ask us to confirm fit.

CHECK THIS AGAINST MY JOB →

Is this the right tool for your job?

✕CHOOSE A DIFFERENT TOOL WHEN
  • Buying for edge performance. If your site does not require non-sparking tools, this is the wrong purchase — the carbon-steel 12050 is the identical scraper with an edge that lasts far longer and files keener, at lower running cost. Reach for brass only when the environment or the substrate demands it.
  • Overhead and pole work. The handle is fixed; there is no extension capability. (No brass pole chisel exists in this family — the pole scrapers 12070/12072 are carbon steel only.)
  • Prying and striking. Soft brass is even less suited to abuse than steel — do not pry with it and never strike it. Prying is the 45600's job.
  • Being treated as a safety device. Re-stated because it is load-bearing: the blade controls sparks, not the atmosphere.

Jobs this tool does

EXACT JOB METHODS FOR HYDE №12055
Job guide How to Scrape in Spark-Controlled EnvironmentsOPEN JOB GUIDE

For these jobs—use this instead

THE JOB, THE REASON, AND THE BETTER TOOL
Buying for edge performance If your site does not require non-sparking tools, this is the wrong purchase — the carbon-steel 12050 is the identical scraper with an edge that lasts far longer and files keener, at lower running… BETTER TOOL Long Handle Chisel Scraper, 3” 12050 Overhead and pole work The handle is fixed; there is no extension capability. (No brass pole chisel exists in this family — the pole scrapers 12070/12072 are carbon steel only.) BETTER TOOL Bent Chisel Pole Scraper, 3” 12070 Prying and striking Soft brass is even less suited to abuse than steel — do not pry with it and never strike it. Prying is the 45600's job. BETTER TOOL 9-1/2" Bent Pry Bar/Scraper 45600

How the pros run it

01

Angle

low, 20–30°, same as any chisel scraper — brass shears best when it is not asked to chop. Direction: push. Edge care: this is where brass departs from steel. You cannot expect steel edge life, and you dress the edge far more often — a mill file takes brass down quickly, so touch it up early and often rather than forcing a dull blade (forcing it defeats the whole point, because a dull tool pressed hard is exactly where technique and spark discipline slip). Brass does not rust, so there is no dry-wipe ritual after wet work — one maintenance chore the steel siblings carry that this one does not. Handling in the hot zone: follow the site's tool-control and bonding/grounding rules; the blade being brass does not exempt the job from them.

Asked before buying

BUYER QUESTIONS, ANSWERED BEFORE YOU ORDER
Why is this one brass?
So it cannot throw a spark in a flammable or explosive atmosphere, and so it will not mar a delicate surface. That is the entire reason to choose it.
Does brass make the job safe?
No. It removes one ignition source. Ventilation, gas testing, and hot-work permits still govern the work.
Why does the edge dull so fast?
Brass is soft by design. Dress it early and often with a mill file; that is the trade for non-sparking.
Should I buy this for general paint scraping?
No — buy the carbon-steel 12050 unless your site requires non-sparking tools.
Does it rust?
No. That is one upkeep chore the steel siblings have that this one does not.

Compare Hyde models

Crew & facility ordering

Model & SKUModel 12055 · SKU H-12055 · UPC 079423120558
Product-specific quantity pricingSee this product’s published tiers above. Eligible discounts apply automatically at checkout.
PO & NET-30Approved contractors, facilities, schools and government buyers can route through Hyde Pro.
BUY FOR A CREW OR FACILITY →

Reviews

Specs & documentation

Full specification details
catalog product name
3" Long Handle Brass Chisel Scraper
official family claim
3" carbon steel blades.
official family claim
Brass non-spark blade.
official family claim
8" polypropylene handle.
official family claim
Measures 11-1/2" overall.
corroborated construction material
Retailer/distributor listing independently repeats: brass.
Hyde official catalog evidence ↗
$29.34PER UNIT · H-12055