Selected subtotal: $12.79. Standard US shipping is $9.99 below $15, $7.99 from $15 to below $49, and free at $49 after discounts. Freight items excluded; other rates are shown at checkout.
CURRENTLY UNAVAILABLECONFIRM EXACT-MODEL SUPPLY WITH HYDE
✓SAME-DAY DISPATCH — ELIGIBLE IN-STOCK ORDERS BY 2 PM ET
✓STANDARD US SHIPPING — $9.99 BELOW $15 · $7.99 FROM $15 · FREE AT $49 AFTER DISCOUNTS
✓LOCAL PICKUP — FALL RIVER
✓NET-30 & PO — APPROVED ACCOUNTS
Hyde 80962
PRODUCT FIT · IS THIS THE RIGHT TOOL?Straight answers. If it's the wrong tool for your job, we'll say so.
The guidance below describes applications and limitations. For a match to your particular job or an existing tool, ask us to confirm fit.
Not a long-line coverage brush — a full wall-ceiling seam is faster and steadier with a 2-1/2″.
Not the muntin brush — narrow reveals and divided lights are 1-1/2″ work, where a 2″ overshoots.
Not the finish-first premium cut: for a scrutinized line in fast-flashing low-VOC latex, the SRT tiers (80841 Elegance, 80621/80622 Ultra) taper-release cleaner than plain poly-nylon.
Not the oil/varnish mirror-finish brush — that's natural white bristle.
Not a scrub or prep brush; grit belongs to the wire and stripping side of the catalog, not to a cut-in tip.
the reservoir belongs in the belly, the heel stays clean. Set a bead, then draw it — off the line to unload, on the line with the toe to cut. Pull once, from the arm on a straight run; don't scrub. Toe leads; flip the brush end-for-end to change direction. Reload before it drags — a starved brush fuzzes the line, and the cure is paint, not pressure. Poly-nylon likes water-based paint and holds its spring wet; it tolerates oil but isn't the varnish tool. Clean to the heel, comb straight every session — a poly-nylon sash cared for this way lasts many years, and one night of dried latex in the heel ends it (line-wide care rule).
Asked before buying
BUYER QUESTIONS, ANSWERED BEFORE YOU ORDER
What series is the 80962?
None is stated on the record . What's disclosed is the part that determines how it paints: 2″, angular, polyester-nylon, wood handle (§1).
80962 or the 80662?
Near-identical spec; the 80662 carries the Optimum Ultra badge, the 80962 carries none. They're distinct SKUs, not a duplicate — buy on whether a stated tier matters to you (§5).
80962 or the SRT 80841?
Same 2″ width, different filament: poly-nylon workhorse versus SRT taper-release. Production → 80962; scrutinized finish in premium paint → 80841 (§5).
What's a 2″ angular sash best at?
General small cut-in — casings, baseboard tops, average trim, small or cluttered walls, doors (§2).
Latex or oil?
Waterborne is its home; poly-nylon holds its spring wet. It tolerates oil but isn't the varnish brush (§3, §4).
How do I make a wood-handled poly-nylon sash last?
Wash to the heel and comb it straight every session; dried latex in the heel is what ends these brushes (§3).
