Selected subtotal: $7.98. Standard US shipping is $9.99 below $15, $7.99 from $15 to below $49, and free at $49 after discounts. Freight items excluded; other rates are shown at checkout.
IN STOCK
✓SAME-DAY DISPATCH — ELIGIBLE IN-STOCK ORDERS BY 2 PM ET
✓STANDARD US SHIPPING — $9.99 BELOW $15 · $7.99 FROM $15 · FREE AT $49 AFTER DISCOUNTS
✓LOCAL PICKUP — FALL RIVER
✓NET-30 & PO — APPROVED ACCOUNTS
9"/10oz. Smooth Rod Caulk Gun Homeowner Series
Official Hyde specifications
Quick-release thumb lever
Powder-coated steel
PRODUCT FIT · IS THIS THE RIGHT TOOL?Straight answers. If it's the wrong tool for your job, we'll say so.
The guidance below describes applications and limitations. For a match to your particular job or an existing tool, ask us to confirm fit.
This gun is for standard caulk and sealant work; for daily polyurethane or subfloor adhesive, move up to Hyde hex-rod or heavy-duty construction-adhesive guns. Hyde lists no thrust rating for this gun, so buyers running stiff chemistry every day should confirm drive suitability with Hyde directly.
Not a 13" gun: the 32 oz. class belongs to the 46420, and nothing about this frame accepts it.
Not a sausage gun — bulk foil chubs need a sealed-barrel tool from a different class entirely.
Not a removal or tooling instrument: stripping the old bead and smoothing the new one are the 43660's claimed jobs.
And not a StopDrip gun: clean stops here are a thumb habit, not an engineered guarantee — the distinction is exactly what the 46310 exists to sell.
Bead ends → thumb presses → nozzle lifts, in that order, every time; the gun rewards the habit with clean stops and punishes its absence immediately. Travel speed is the throttle. Extrusion rate divided by hand speed equals bead size; your hand controls speed far more precisely than pressure, so fix the pressure and steer with the pace. Take-up strokes are normal. A fresh cartridge needs a few squeezes before the plunger seats and caulk moves — build that into your expectations, not your frustration. Warm the cartridge. Cold sealant is stiff sealant, and stiffness is the friction plate's hardest case: a tube that lived in the garage overnight goes indoors an hour before work, in a pocket for the last ten minutes. Wipe the rod. A smooth rod that gets caulk-crusted robs the plate of its grip; a rag pass at cleanup keeps the drive honest. The frame's powder coat asks nothing beyond the same wipe.
Asked before buying
BUYER QUESTIONS, ANSWERED BEFORE YOU ORDER
46400 or 46410 — which Homeowner gun?
This one, if the question has to be asked. The smooth rod's thumb-lever release is the beginner-forgiving choice because it makes clean stops mechanical rather than disciplinary; the 46410 rewards a practiced rod-release habit with a more positive per-stroke advance.
Is this a dripless gun?
No such claim exists, and this page won't invent one. The physics are favorable — a friction drive holds less residual push than a pawl-held ratchet, and the lever dumps what's left on demand — but engineered anti-ooze is the StopDrip guns' claimed territory (46310, 46420).
What cartridges does it take?
The 9", 10 oz. standard class named in its catalog title — the ordinary caulk tube. The 13"/32 oz. format belongs to the 46420 alone in this line.
Where's the spout cutter?
Not on this gun — no prep tools appear in its claims. Utility knife for the tip, long nail for the inner seal, or let the 43660's tube cutter do the slicing.
Can it push construction adhesive?
For adhesive work, use the 46435, 46482, 46484, or 46420. Warm the material when the adhesive calls for it and dispense slowly; these listings give model fit rather than a thrust rating for high-force adhesives.
Hex or smooth — the website says both?
Hyde's storefront titles this model "Hex/Smooth" while the catalog says smooth rod . Functionally they are one drive family — friction plate, thumb lever — and that behavior is what you're buying; the rod's exact cross-section awaits confirmation on the physical tool.
Will the frame rust?
The claim is powder-coated steel; keep the coat intact and wipe the gun down after wet work, and the frame is the last part of this tool you'll think about.
