Richard 99902 Specialty Series 9-inch foam roller cover, 3/8-inch pile
Foam Roller Covers — Roller Covers
№99902

Richard 99902 SPECIALITY SERIES FOAM ROLLER

BEST FOR · Rouleau / Manchonen éponge de 9 1/2 po, 3 mm épaisseur, série Spécialité, tube en phénolique(99901, 99902, 99903)
MODEL 99902 · SKU H-99902 · UPC 066395999527
CHECK THIS AGAINST MY JOB
$3.32 PER UNIT · SINGLE UNIT UNIT PRICE

Selected subtotal: $3.32. Standard US shipping is $9.99 below $15, $7.99 from $15 to below $49, and free at $49 after discounts. Freight items excluded; other rates are shown at checkout.

IN STOCK
✓ SAME-DAY DISPATCH — ELIGIBLE IN-STOCK ORDERS BY 2 PM ET
✓ STANDARD US SHIPPING — $9.99 BELOW $15 · $7.99 FROM $15 · FREE AT $49 AFTER DISCOUNTS
✓ LOCAL PICKUP — FALL RIVER
✓ NET-30 & PO — APPROVED ACCOUNTS
Rouleau / Manchonen éponge de 9 1/2 po, 3 mm épaisseur, série Spécialité, tube en phénolique(99901, 99902, 99903)

Documented Richard specifications

official product or family name
SPECIALITY SERIES FOAM ROLLER
official description
Rouleau / Manchonen éponge de 9 1/2 po, 3 mm épaisseur, série Spécialité, tube en phénolique(99901, 99902, 99903)
PRODUCT FIT · IS THIS THE RIGHT TOOL? Straight answers. If it's the wrong tool for your job, we'll say so.

Choose this when: Rouleau / Manchonen éponge de 9 1/2 po, 3 mm épaisseur, série Spécialité, tube en phénolique(99901, 99902, 99903)

CHECK THIS AGAINST MY JOB →

Is this the right tool for your job?

✓CHOOSE THIS WHEN
  • Rouleau / Manchonen éponge de 9 1/2 po, 3 mm épaisseur, série Spécialité, tube en phénolique(99901, 99902, 99903)
✕CHOOSE A DIFFERENT TOOL WHEN
  • Walls and high-volume field work. Even with more capacity than the 1/8″, a foam cover holds far less than a fiber nap and isn't built to cover a wall; the fiber covers own the field.
  • Texture. The continuous foam face bridges any texture and rides the peaks — knockdown, stucco, brick, block all defeat it. Foam is dead-smooth only.
  • The absolute thinnest-film finish. Where the deliverable is the single most leveled, closest-to-sprayed coat on a small critical flat panel, the thinner 1/8″ 99901 lays a marginally finer film; the 3/8″ trades a touch of that for volume. Match the cover to whether finish or coverage is the scarce resource.
  • Fast single heavy builds. More capacity is not license for a thick pass — foam runs and bubbles when overloaded. Thin coats, more of them.

For these jobs—use this instead

THE JOB, THE REASON, AND THE BETTER TOOL
The absolute thinnest-film finish Where the deliverable is the single most leveled, closest-to-sprayed coat on a small critical flat panel, the thinner 1/8″ 99901 lays a marginally finer film; the 3/8″ trades a touch of that for… BETTER TOOL 9" foam roller cover, SPECIALITY series 99901

How the pros run it

01

Slow, always

Foam aerates coating when driven fast, and late-popping bubbles leave craters — the thicker wall doesn't change this rule. Thin coats despite the capacity. The 3/8″ wall's gift is fewer reloads, not a thicker film; build gloss and clear finishes in thin passes. Meter on the ramp. Foam saturates and releases fast; work the load out on the tray's ramp until the face is evenly damp, not dripping — the deeper wall can dump a heavy edge-bead if overloaded. Keep it out of fast latex. Foam's boundary is quick-skinning waterborne paints, which it bubbles when overworked; this cover's home is the slow-leveling finish coat. Clean-and-keep vs sacrifice: the phenolic core and thicker wall make this the more reusable foam in solvent work; still, weigh a solvent bath against foam's low replacement cost. Wrap airtight between coats; a dried foam face is done.

Asked before buying

BUYER QUESTIONS, ANSWERED BEFORE YOU ORDER
Big smooth door or several panels in enamel — is this the one?
Yes: the thicker 3/8″ foam carries more coating for fewer reloads across a large smooth surface, with foam's fiber-free finish and a solvent-tolerant phenolic core (§2a).
99902 or 99901?
More coating and fewer reloads on a big smooth surface → the 3/8″ 99902; the thinnest, finest film on a small critical flat → the 1/8″ 99901 — noting the thickness conflict on the record (§5, §8).
Why "3/8″" if the official spec says 3 mm?
That is the open conflict: the family blurb prints 3 mm (≈1/8″) for all three SKUs, which can't also describe a genuinely 3/8″ cover — flagged and escalated for resolution before any hard thickness prints (§8).
What's the phenolic core for?
It resists the solvents in oil/alkyd/urethane coatings that dissolve cardboard cores — the reason a foam cover can work in those finishes (§1). Exact claim wording pending .
Can I do a textured wall or a whole room?
No — foam bridges texture and holds too little paint for volume; use a fiber cover (§4).

Compare Richard models

Crew & facility ordering

Model & SKUModel 99902 · SKU H-99902 · UPC 066395999527
Product-specific quantity pricingSee this product’s published tiers above. Eligible discounts apply automatically at checkout.
PO & NET-30Approved contractors, facilities, schools and government buyers can route through Hyde Pro.
BUY FOR A CREW OR FACILITY →

Reviews

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

Specs & documentation

Full specification details
official product or family name
SPECIALITY SERIES FOAM ROLLER
official description
Rouleau / Manchonen éponge de 9 1/2 po, 3 mm épaisseur, série Spécialité, tube en phénolique(99901, 99902, 99903)
Richard manufacturer source ↗
$3.32PER UNIT · H-99902