Hyde Tools 61770 Heavy Duty Mill Knife (404) | the Hyde Store
Fixed Industrial Knives — Primary Tool
№61770

Hyde Tools 61770 Heavy Duty Mill Knife H404

BEST FOR · Hardened 14 gauge high-carbon steel blade. Ground and tempered to precise tolerances. Smooth hardwood handle. Blade is secured in place with compression cutlery rivets. Used for heavy duty cutting applications. Blade measures 4"x1-1/4"x.083".
MODEL 61770 · SKU H-61770 · UPC 079423617706
CHECK THIS AGAINST MY JOB
$21.95 PER UNIT · SINGLE UNIT UNIT PRICE

IN STOCK
✓ SAME-DAY DISPATCH — ELIGIBLE IN-STOCK ORDERS BY 2 PM ET
✓ FREE SHIPPING — ORDERS OVER $30
✓ LOCAL PICKUP — FALL RIVER
✓ NET-30 & PO — APPROVED ACCOUNTS
Hardened 14 gauge high-carbon steel blade. Ground and tempered to precise tolerances. Smooth hardwood handle. Blade is secured in place with compression cutlery rivets. Used for heavy duty cutting applications. Blade measures 4"x1-1/4"x.083".
Dimensions
4" x 1-1/4" x .083"
Hyde specifies
Official feature
Used for heavy-duty applications
Hyde specifies
Official feature
Hardened high-carbon steel blade, ground and tempered to precise tolerances. Smooth hardwood handle. Blade is securely riveted in place with compression cutlery rivets
Hyde specifies
THE COUNTER · PRODUCT FIT Straight answers. If it's the wrong tool for your job, we'll say so.

Choose this when: Hardened 14 gauge high-carbon steel blade. Ground and tempered to precise tolerances. Smooth hardwood handle. Blade is secured in place with compression cutlery rivets. Used for heavy duty cutting applications. Blade measures 4"x1-1/4"x.083".

CHECK THIS AGAINST MY JOB →

Is this the right tool for your job?

✓CHOOSE THIS WHEN
  • Hardened 14 gauge high-carbon steel blade. Ground and tempered to precise tolerances. Smooth hardwood handle. Blade is secured in place with compression cutlery rivets. Used for heavy duty cutting applications. Blade measures 4"x1-1/4"x.083".
✕DO NOT FORCE THE FIT
  • Reach. Four inches is short by design; deep slabbing of foam and paper rolls belongs to the eight-inch square points, whose length the H404 deliberately trades away for mass.
  • Fine or detailed cutting. A broad, heavy blade is the wrong tool for close trimming, shaping, and skiving — those are the small square points and the skivers.
  • Precision belt splicing. Opening a cover on a scribe line wants a longer square-point edge; the mill knife is for brute portioning, not the step splice.
  • Scraping, prying, or striking — it is a cutting edge, however stout, in a wooden handle.
  • Generic light cutting. If the work isn't heavy enough to break a normal knife, you're paying for mass you don't need; buy a standard square point or feed a utility blade.

Jobs this tool does

EXACT JOB METHODS FOR HYDE №61770
Counter-checked How to Cut Core and Tube Stock Scrap at a Winder or CutoffOPEN JOB GUIDE Counter-checked How to Cut Uncured Rubber Stock — Controlled Mill-Bench GuideOPEN JOB GUIDE Counter-checked General Mill-Floor CuttingOPEN JOB GUIDE

How the pros run it

01

Force, close to the hand

This is a short, powerful knife — plant the material, keep the cut in front of you, and drive the broad edge with a full fist; its whole design is about putting concentrated force into heavy stock, not reaching. Keep the off hand out of the line. Heavy forceful cuts through dense material break free hard; the steadying hand stays clear of and behind the blade's path. Progressive strokes on the toughest stock — even a stiff blade cuts dense, layered material better in deepening passes than in one forced chop. Sharpen and maintain it. The .083" high-carbon edge takes and holds a keen edge from a stone; dress it square when heavy, abrasive stock dulls or rolls it, and wipe it dry after wet or tacky rubber work. The compression-riveted handle is the most durable in the line, but the blade is still maintained, not replaced — which is the whole point of buying an overbuilt knife instead of feeding disposables.

Asked at the counter

BUYER QUESTIONS ANSWERED BEFORE THE CART, NOT AFTER THE RETURN
What makes it a "heavy duty" knife?
Width and construction. At 1-1/4" it is the broadest, stiffest blade in the line, at the heavy .083" gauge, anchored with the line's heaviest compression cutlery rivets. It is built to be leaned on all day.
Why is it only four inches?
Because it is a force knife, not a reach knife. Short keeps the mass concentrated and controllable. For deep, long cuts, the eight-inch square points are the tools.
How is it different from the 60450, which is also 4" × .083"?
A quarter-inch of blade width (1-1/4" vs 1") and the compression-riveted handle. That width is stiffness; buy the H404 where the narrower knife flexes or loosens under heavy stock.
Will it splice a conveyor belt?
For brute portioning of heavy rubber, yes; for opening a cover cleanly on a scribe line, a longer square point (60780/60810) is better. Different cuts.
Does it need sharpening?
Yes — it's high-carbon steel and a maintained knife, which is the reason to buy it over feeding disposable blades on abrasive work.
Will it rust?
High-carbon cutlery steel: hone it, wipe it dry after wet or tacky work.

Compare Hyde models

Crew & facility ordering

Model & SKUModel 61770 · SKU H-61770 · UPC 079423617706
Quantity pricingPublished tiers apply automatically at checkout. Private account prices are never invented.
PO & NET-30Approved contractors, facilities, schools and government buyers can route through Hyde Pro.
BUY FOR A CREW OR FACILITY →

Reviews

Customer Reviews

Based on 2 reviews
100%
(2)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
M
Michael Tomberlin (Tifton, US)
Knife and pouch

Very happy and satisfied. Everything arrived in good condition. Very durable and would buy again!

K
Kurt Schaefer (Brownsville, US)
Hyde Tools Mill Knife: Awesome

When I found this knife in my search I wasn’t sure what I was actually getting. Well, what I received was happily beyond my expectations.
I am extremely happy with this knife and I expect it to serve me forever with some periodic sharpening.
Thank’s Hyde Tools!

Specs & documentation

Full spec sheet
catalog product name
Heavy Duty Mill Knife H404 — OFFICIAL EXACT MODEL
specifications
dimensions: 4" x 1-1/4" x .083" — OFFICIAL EXACT MODEL
official family claim
Hardened high-carbon steel blade, ground and tempered to precise tolerances. Smooth hardwood handle. Blade is securely riveted in place with compression cutlery rivets. — OFFICIAL FAMILY CLAIM APPLICABLE TO EXACT LISTED MODEL
official family claim
Used for heavy-duty applications. — OFFICIAL FAMILY CLAIM APPLICABLE TO EXACT LISTED MODEL
official variant identity
61770 — OFFICIAL EXACT VARIANT
official description
Hardened 14 gauge high-carbon steel blade. Ground and tempered to precise tolerances. Smooth hardwood handle. Blade is secured in place with compression cutlery rivets. Used for heavy duty cutting applications. Blade measures 4"x1-1/4"x.083". — OFFICIAL EXACT MODEL
Hyde official catalog evidence ↗Hyde Tools manufacturer source ↗
$21.95SKU H-61770