Hyde Tools 60120 Square Point Knife, Safety Wood Handle | the Hyde Store
Square Point Industrial Knives — Primary Tool
№60120

Hyde Tools 60120 Square Point Knife, Safety Wood Handle

MODEL 60120 · SKU H-60120 · UPC 079423601200
CHECK THIS AGAINST MY JOB
$14.53 PER UNIT · SINGLE UNIT UNIT PRICE

Selected subtotal: $14.53. Standard US shipping is $9.99 below $15, $7.99 from $15 to below $49, and free at $49 after discounts. Freight items excluded; other rates are shown at checkout.

IN STOCK
✓ SAME-DAY DISPATCH — ELIGIBLE IN-STOCK ORDERS BY 2 PM ET
✓ STANDARD US SHIPPING — $9.99 BELOW $15 · $7.99 FROM $15 · FREE AT $49 AFTER DISCOUNTS
✓ LOCAL PICKUP — FALL RIVER
✓ NET-30 & PO — APPROVED ACCOUNTS
60120 — 4" x 1" x .065"

Official Hyde specifications

Size
4" x 1" x .065"
PRODUCT FIT · IS THIS THE RIGHT TOOL? Straight answers. If it's the wrong tool for your job, we'll say so.

The guidance below describes applications and limitations. For a match to your particular job or an existing tool, ask us to confirm fit.

CHECK THIS AGAINST MY JOB →

Is this the right tool for your job?

✕CHOOSE A DIFFERENT TOOL WHEN
  • Belting cover and dense reinforced rubber or gasket — the .065" flexes under that load whether guarded or not; buy the .083" 60510 (guarded) or 60450 (bare).
  • Deep or dense foam — the hollow-ground 60180/60480.
  • The most delicate close-in trimming where you'd choke onto the blade — the guard blocks it; use the bare 60090.
  • Heavy sole leather — the numbered heavy bench knives.
  • And it is not a pry bar, scraper, or striking tool.

For these jobs—use this instead

THE JOB, THE REASON, AND THE BETTER TOOL
Belting cover and dense reinforced rubber or gasket The .065" flexes under that load whether guarded or not; buy the .083" 60510 (guarded) or 60450 (bare). BETTER TOOL Square Point Knife, Safety Wood Handle 60510 Deep or dense foam The hollow-ground 60180/60480. BETTER TOOL Hollow Ground Square Point Knife 60180 Choked-up delicate trimming The guard blocks it; use the bare 60090. BETTER TOOL Square Point Knife, Wood Handle 60090

How the pros run it

01

Low angle, sliced cut, tensioned material

The guard changes none of the textile fundamentals: lay the blade down to slice, keep the goods under tension, and pull the edge through cleanly. A dull or steep blade drags weave no matter how safe the handle.
02

Seat your grip on the guard

Let the finger stop set a repeatable hand position — the same seating every cut. That consistency is part of what the safety handle buys you beyond the raw hand-stop.
03

Respect the edge despite the guard

The finger guard stops a slip; it does not make it safe to cut toward your other hand. Keep the free hand behind the blade's travel. Treat the guard as insurance, not permission.
04

Maintain the high-carbon edge

Hone on a stone, strop, wipe dry after damp work. The 60120 lives on cloth and light sheet, which shows a dull edge instantly as drag and fray — keep it keen.

Asked before buying

BUYER QUESTIONS, ANSWERED BEFORE YOU ORDER
What's different from the 60090?
Only the safety handle's finger guard. Same 4" × 1" × .065" blade and cut.
Why guard such a light knife?
Because safety rules are written per crew, not per cut — a guarded-knife floor needs the light cutting jobs guarded too — and for wet or slick hands.
Does the guard limit control?
It blocks choking fully onto the blade for the most delicate trims; otherwise the cut is identical to the 60090.
Can it cut belting?
No — the .065" is too light; use the .083" 60510 (guarded) or 60450 (bare).
Wood or soft-grip handle?
Listings say "Safety Wood Handle"; the catalog says "soft-grip handle with built-in finger guard" — the guard is certain; the handle-material wording is being reconciled.

Compare Hyde models

Crew & facility ordering

Model & SKUModel 60120 · SKU H-60120 · UPC 079423601200
Product-specific quantity pricingSee this product’s published tiers above. Eligible discounts apply automatically at checkout.
PO & NET-30Approved contractors, facilities, schools and government buyers can route through Hyde Pro.
BUY FOR A CREW OR FACILITY →

Reviews

Specs & documentation

Full specification details
catalog product name
Square Point Safety Knife
specifications
size: 4" x 1" x .065"
official family claim
Safety guard protects fingers.
official family claim
Safety guard protects fingers
official product name
Square Point Knives w/ Safety Handle
official variant identity
60120 — 4" x 1" x .065"
Hyde official catalog evidence ↗Hyde Tools manufacturer source ↗
$14.53PER UNIT · H-60120