Hyde Tools 34015 MAXXGRIP® Wallcovering Shears, 11” | the Hyde Store
Wallcovering Trim And Layout — Primary Tool
№34015

Hyde Tools 34015 11" MAXXGRIP® Stainless Steel Professional Shears

BEST FOR · Oversize stainless steel shears for scoring and cutting wallcovering, fabric, foil, plastic, vinyl and more. Stainless blades resist corrosion and hold a sharp edge. Adjustable tension. Precision tip for scoring materials to be cut. Soft-grip handles fit left or right hand.
MODEL 34015 · SKU H-34015 · UPC 079423340154
CHECK THIS AGAINST MY JOB
$19.44 PER UNIT · SINGLE UNIT UNIT PRICE

AVAILABLE TO ORDER · CONFIRM LEAD TIME
✓ SAME-DAY DISPATCH — ELIGIBLE IN-STOCK ORDERS BY 2 PM ET
✓ FREE SHIPPING — ORDERS OVER $30
✓ LOCAL PICKUP — FALL RIVER
✓ NET-30 & PO — APPROVED ACCOUNTS
Oversize stainless steel shears for scoring and cutting wallcovering, fabric, foil, plastic, vinyl and more. Stainless blades resist corrosion and hold a sharp edge. Adjustable tension. Precision tip for scoring materials to be cut. Soft-grip handles fit left or right hand.

Official Hyde specifications

Length
11"
Stainless blades with precision tip for scoring materials to be cut
Soft-grip handles fit left or right hand
PRODUCT FIT · IS THIS THE RIGHT TOOL? Straight answers. If it's the wrong tool for your job, we'll say so.

Choose this when: Oversize stainless steel shears for scoring and cutting wallcovering, fabric, foil, plastic, vinyl and more. Stainless blades resist corrosion and hold a sharp edge. Adjustable tension. Precision tip for scoring materials to be cut. Soft-grip handles fit left or right hand.

CHECK THIS AGAINST MY JOB →

Is this the right tool for your job?

✓CHOOSE THIS WHEN
  • Oversize stainless steel shears for scoring and cutting wallcovering, fabric, foil, plastic, vinyl and more. Stainless blades resist corrosion and hold a sharp edge. Adjustable tension. Precision tip for scoring materials to be cut. Soft-grip handles fit left or right hand.
✕CHOOSE A DIFFERENT TOOL WHEN
  • Trimming a hung, smoothed strip at ceiling or baseboard — the defining not.
  • Getting shear blades under wet paper means pulling the strip back off the wall, stretching and creasing everything the smoother just set; the trim cut belongs to the razor knife riding a guide, and this line splits those jobs on purpose.
  • Not board or gypsum work — drywall dulls knife edges and would do worse to shears; nothing about this tool belongs in demolition.
  • Not aviation-snip or sheet-metal duty — the claimed scope is wallcovering, fabric, foil, plastic, and vinyl, and this corpus doesn't extend it to metals (foil here reads as wallcovering-class foils per the claim's own context, not roofing stock).
  • Not a seam roller, not a smoother — after the shears cut it and the paste hangs it, other tools take over.

Jobs this tool does

EXACT JOB METHODS FOR HYDE №34015
Job guide Cut Sheet Materials with ShearsOPEN JOB GUIDE

How the pros run it

01

Full strokes, few strokes

open wide, drive through the whole closing arc, and plan the cut so it finishes in one or two arcs — re-entries are where jags live. Let the intersection travel: the cut happens where the edges cross; feed the material to that moving point rather than twisting the shears toward the material. Tension tuning: claimed-adjustable, and the test is simple — snip a scrap; if the material folds between the blades, tighten; if the stroke binds, back off. Retune when you change materials, not per cut. Hand fit: the grips fit left or right by claim; whichever hand cuts, the free hand manages the sheet so the cut line stays unloaded. End of day: paste and grit wiped off, pivot checked, dry storage — stainless resists corrosion and holds its edge by claim, and neither claim is an invitation to put them away dirty.

Asked before buying

BUYER QUESTIONS, ANSWERED BEFORE YOU ORDER
Why 11 inches?
Because a wallpaper strip is wider than 20 inches and the professional cut crosses it in one or two strokes. Blade length is re-entry insurance, and re-entries are where cut lines jag.
Left-handed use?
Claimed directly: the soft-grip handles fit left or right hand.
Will paste hurt them?
Wipe it off and no — stainless blades resist corrosion by claim. The wipe-down is about crisp shearing, not rust panic.
What is the little tip for?
Scoring the cut line before shearing — the claimed precision tip. Score-then-cut keeps springy stock from walking off the mark.
Can I trim at the ceiling with them?
No — that cut belongs to the razor knife against a guide. Shears under a hung wet strip pull it off the wall.
What's the tension adjustment for?
Matching the blades to the material: snug for foil so it can't fold between the edges, freer for heavy vinyl so the stroke stays smooth. Snip a scrap and tune.
What else around the shop will they cut?
The claimed scope: fabric, foil, plastic, vinyl — drop cloths, containment plastic, shelf liner, template work — plus everything wallcovering.

Compare Hyde models

Crew & facility ordering

Model & SKUModel 34015 · SKU H-34015 · UPC 079423340154
Product-specific quantity pricingSee this product’s published tiers above. Eligible discounts apply automatically at checkout.
PO & NET-30Approved contractors, facilities, schools and government buyers can route through Hyde Pro.
BUY FOR A CREW OR FACILITY →

Reviews

Specs & documentation

Full specification details
catalog product name
11" MAXXGRIP® Stainless Steel Professional Shears
specifications
length: 11"
official family claim
Stainless blades with precision tip for scoring materials to be cut.
official family claim
Soft-grip handles fit left or right hand.
official variant identity
34015
official description
Oversize stainless steel shears for scoring and cutting wallcovering, fabric, foil, plastic, vinyl and more. Stainless blades resist corrosion and hold a sharp edge. Adjustable tension. Precision tip for scoring materials to be cut. Soft-grip handles fit left or right hand.
corroborated construction material
Retailer/distributor listing independently repeats: stainless steel.
Hyde official catalog evidence ↗Hyde Tools manufacturer source ↗
$19.44PER UNIT · H-34015