Search
Use this section to help customers find the products they're looking for.
Dust-free vacuum sanders aren't just for drywall anymore! This patented new sander attaches to a wet-dry vac and uses a sanding sponge that works ...
View full detailsSand indoor surfaces without creating a dusty mess using this lightweight sander attached to a standard shop vacuum. Hand sanding kit comes with on...
View full details5.0 / 5.0
1 Review
Rectangular 150/medium grit sponge has grit on 2 sides for sanding flat surfaces.
Comes with a 3-sided, fine-grit triangular sanding sponge (item #09056) for sanding both sides of a drywall corner simultaneously.
5.0 / 5.0
1 Review
Three-layer sponge includes abrasive side for sanding drywall; super absorbent side for cleaning and wiping surfaces; and center layer to act as a ...
View full detailsSand indoor surfaces without creating a dusty mess using this lightweight sander attached to a standard shop vacuum. Pole sanding kit comes with on...
View full detailsDesigned specifically for use with drywall compound, this unique sandscreen has a smaller mesh that prevents scratching walls. 45-degree mesh angle...
View full detailsRectangular 150/medium grit sponge has grit on 4 sides for sanding flat and abutting surfaces.
High-quality, lightweight aluminum pole sanding head. Unique EasyClamp system allows for quick sheet changing. Uses 3-1/4" x 9-3/8" (83mm x 239mm) ...
View full detailsComes with a 2-sided, medium grit sponge (item#09083). Quick, easy changeout for sponge replacement. Can be used with sponges #09051, #09052, #0905...
View full detailsHeavy double-grit 3" x 5" x 1" aluminum oxide abrasive blocks for flat or contour sanding, wet or dry. Rinse to clean.
Heavy double-grit 3" x 5" x 1" aluminum oxide abrasive blocks for flat or contour sanding, wet or dry. Rinse to clean.
5.0 / 5.0
1 Review
Sand indoor surfaces without creating a dusty mess using this lightweight sander attached to a standard shop vacuum. Pole sanding kit comes with on...
View full detailsDrywall Repair Kit Including Rubber Sanding Block & Fiberglass Tape!
Flexible rubber. Holds paper securely on bottom for flat sanding or on top for tackling curves. Uses 1/4 sheet of standard 9" x 11" sandpaper.
Double-grit 2-3/4" x 4" x 1" sanding blocks for flat or contour sanding, wet or dry. Rinse to clean.
Double-grit 2-3/4" x 4" x 1" sanding blocks for flat or contour sanding, wet or dry. Rinse to clean.
Designed specifically for use with drywall compound, this unique sandscreen has a smaller mesh that prevents scratching walls. 45-degree mesh angle...
View full detailsSuper-lightweight construction. Sanding surface measures 3-1/4" x 9-3/8" (83mm x 239mm).
Comfortable overmold handle with EasyClamp system for quickly changing abrasive sheets. Rubberized handle allows for more powerful sanding. Sanding...
View full detailsHigh-quality, lightweight aluminum pole sanding head. Unique EasyClamp system allows for quick sheet changing. Uses 3-1/4" x 9-3/8" (83mm x 239mm) ...
View full detailsLightweight polypropylene sanding head with 3-1/4" x 9" (83mm x 229mm) foam sanding pad for sanding ceilings and walls from floor level. Clamps hol...
View full detailsUse this section to help customers find the products they're looking for.
The 36" & 35" poly spray shields are my go to for spraying and for covering baseboards when rolling walls. The ability to angle forward & back is priceless.
This is the best stir tool I’ve found for 5 gallon buckets. It fits right through the screw cap hole and does a great job mixing products. Highly recommend
I use a ton of these in my concrete coating business. They always perform well, and they can even mix a 5-gallon bucket if you insert it correctly in your drill. And Hyde's price is the best anywhere for this type.
Currently the two shields are still in their packing box due to a delay on this project. This is my second pair of these same shields because dummy here left the previous pair on a job somewhere, likely left out during loading and stolen. The poly shields cost more than the metals but the front-to-back adjustment on them is indispensable.
A hack for rolling walls: Use the wood handle to support the blades on base board. You'll never tape off or wipe down a baseboard again.